Magnetic Pickup
Show/hide table
Illustration 1 | g01160576 |
Typical example (1) Sensor assembly (2) Plug |
Note: Tighten the sensor assembly (1) into the flywheel housing until the sensor touches one of the teeth of the flywheel ring gear. Back out the sensor half a turn in order to provide a clearance of 0.5 mm (0.02 inch) between the sensor and the teeth of the flywheel ring gear. Tighten the locknut for the magnetic pickup finger tight.
(1) Tighten the locknut for the magnetic pickup to the following torque. ... 22 N·m (16 lb ft)
Caterpillar Information System:
C8.7 and C12.9 Marine Engines Cylinder Is Noisy
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250} Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
3512C Engine Engine Oil Pan - Disassemble
C8.7 and C12.9 Marine Engines Valve Lash Is Excessive
WS063, WSF063 and WSP063 Well Stimulation Pumps Gearbox (Input Drive) - Remove and Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Oil Filter (Transmission)
C175-16 Petroleum Engines Engine Oil Pressure - Test
3512C Engine Engine Oil Pan - Remove and Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Relief Valve (Torque Converter Inlet) Pressure - Test
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Relief Valve (Transmission Hydraulic Control) - Test and Adjust
3512C Engine Engine Oil Filter Housing - Remove and Install
3512C Engine Engine Oil Pump - Remove and Install
C4.4 Marine Generator Set Engine Oil Pan Drain Valve
C175-16 Petroleum Engines Air Shutoff
C8.7 and C12.9 Marine Engines Electronic Service Tool Does Not Communicate
WS063, WSF063 and WSP063 Well Stimulation Pumps Crosshead - Remove and Install
WS063, WSF063 and WSP063 Well Stimulation Pumps Crankshaft (Pump) - Remove and Install
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Engine Monitoring System
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Fuel Pressure - Gas System
3512C Engine Engine Oil Pan - Assemble
C175-16 Petroleum Engine Component Location
C175-16 Petroleum Engine Configuration Parameters
C175-16 Petroleum Engine Diagnostic Trouble Codes
C175-16 Petroleum Engine Engine Cranks but Does Not Start