Engine Oil Filter Housing - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 439-3938 | Link Bracket | 2 |
Start By:
- Remove fuel filter housing.
- Remove expansion tank.
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Drain the oil from the engine oil filter housing. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g01113749 - Remove bolts (1) and adapter (2). Remove the O-ring seal from the adapter.
Show/hide table
Illustration 2 g01113751 - Remove bolts (4) and spacers (5) from tube assembly (3).
- Remove bolts (6) and plate (7).
Show/hide table
Illustration 3 g01113831 - Install Tooling (A) and a suitable lifting device on engine oil filter housing (9). The weight of engine oil filter housing (9) is approximately
95 kg (210 lb) . - Remove bolts (8). Remove engine oil filter housing (9).
- Attach a suitable lifting device on oil filter housing support (11). The weight of oil filter housing support (11) is approximately
71 kg (157 lb) . - Remove bolts (10). Remove oil filter housing support (11).
- Install engine oil filter housing (9) in the reverse order of removal.
Caterpillar Information System:
3512C Engine Engine Oil Pump - Remove and Install
326F and 330F Excavator Machine Systems Relief Valve (Pilot)
WS063, WSF063 and WSP063 Well Stimulation Pumps Seal (Crosshead Rod) - Remove and Install
C8.7 Marine Engine Coolant Level - Check
3512C Engine Engine Oil Cooler - Remove and Install
3512C Engine Water Pump - Remove and Install
WS063, WSF063 and WSP063 Well Stimulation Pumps Flange (Discharge) - Remove and Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Power Train Pressures
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Hydraulic Oil Contamination - Test
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Transmission Planetary Troubleshooting
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Torque Converter Troubleshooting
WS063, WSF063 and WSP063 Well Stimulation Pumps Manifold (Suction) - Remove and Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Relief Valve (Transmission Hydraulic Control) - Test and Adjust
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Relief Valve (Torque Converter Inlet) Pressure - Test
3512C Engine Engine Oil Pan - Remove and Install
C175-16 Petroleum Engines Engine Oil Pressure - Test
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Oil Filter (Transmission)
WS063, WSF063 and WSP063 Well Stimulation Pumps Gearbox (Input Drive) - Remove and Install
C8.7 and C12.9 Marine Engines Valve Lash Is Excessive
3512C Engine Engine Oil Pan - Disassemble
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250} Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
C8.7 and C12.9 Marine Engines Cylinder Is Noisy
C4.4 Marine Generator Set Magnetic Pickup
C4.4 Marine Generator Set Engine Oil Pan Drain Valve