Engine Oil Pan - Disassemble
Start By:
- Remove engine oil pan.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove drain plug (3). Remove the O-ring seal from the drain plug.
- Remove cover (2) and O-ring seal (1).
- Remove adapter (6), O-ring seal (5), and suction screen assembly (4).
Show/hide table
Illustration 2 g03671094 - Remove bolts (8), connector assembly (7), and O-rings.
Show/hide table
Illustration 3 g03671181 - Remove bolts (13), bolts (11), and bolts (10).
- Remove suction tube (12) and tube assembly (9).
Show/hide table
| |
| Illustration 1 | g03670797 |
Caterpillar Information System:
C8.7 and C12.9 Marine Engines Valve Lash Is Excessive
WS063, WSF063 and WSP063 Well Stimulation Pumps Gearbox (Input Drive) - Remove and Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Oil Filter (Transmission)
C175-16 Petroleum Engines Engine Oil Pressure - Test
3512C Engine Engine Oil Pan - Remove and Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Relief Valve (Torque Converter Inlet) Pressure - Test
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Relief Valve (Transmission Hydraulic Control) - Test and Adjust
3512C Engine Engine Oil Filter Housing - Remove and Install
3512C Engine Engine Oil Pump - Remove and Install
326F and 330F Excavator Machine Systems Relief Valve (Pilot)
WS063, WSF063 and WSP063 Well Stimulation Pumps Seal (Crosshead Rod) - Remove and Install
C8.7 Marine Engine Coolant Level - Check
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250} Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
C8.7 and C12.9 Marine Engines Cylinder Is Noisy
C4.4 Marine Generator Set Magnetic Pickup
C4.4 Marine Generator Set Engine Oil Pan Drain Valve
C175-16 Petroleum Engines Air Shutoff
C8.7 and C12.9 Marine Engines Electronic Service Tool Does Not Communicate
WS063, WSF063 and WSP063 Well Stimulation Pumps Crosshead - Remove and Install
WS063, WSF063 and WSP063 Well Stimulation Pumps Crankshaft (Pump) - Remove and Install
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Engine Monitoring System
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Fuel Pressure - Gas System
3512C Engine Engine Oil Pan - Assemble
C175-16 Petroleum Engine Component Location