Engine Oil Pump - Remove and Install
Start By:
- Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Show/hide table
Illustration 1 g03414941 - Remove bolts (1).
Show/hide table
Illustration 2 g03670429 - Remove bolts (3).
- Attach a suitable lifting device to engine oil pump (2). The weight of engine oil pump (2) is approximately
42 kg (93 lb) . - Remove bolts (1) and engine oil pump (2).
- Install engine oil pump (2) in the reverse order of removal.
Caterpillar Information System:
326F and 330F Excavator Machine Systems Relief Valve (Pilot)
WS063, WSF063 and WSP063 Well Stimulation Pumps Seal (Crosshead Rod) - Remove and Install
C8.7 Marine Engine Coolant Level - Check
3512C Engine Engine Oil Cooler - Remove and Install
3512C Engine Water Pump - Remove and Install
WS063, WSF063 and WSP063 Well Stimulation Pumps Flange (Discharge) - Remove and Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Power Train Pressures
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Hydraulic Oil Contamination - Test
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Transmission Planetary Troubleshooting
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Torque Converter Troubleshooting
WS063, WSF063 and WSP063 Well Stimulation Pumps Manifold (Suction) - Remove and Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Speed Sensor (Transmission)
3512C Engine Engine Oil Filter Housing - Remove and Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Relief Valve (Transmission Hydraulic Control) - Test and Adjust
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Relief Valve (Torque Converter Inlet) Pressure - Test
3512C Engine Engine Oil Pan - Remove and Install
C175-16 Petroleum Engines Engine Oil Pressure - Test
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Oil Filter (Transmission)
WS063, WSF063 and WSP063 Well Stimulation Pumps Gearbox (Input Drive) - Remove and Install
C8.7 and C12.9 Marine Engines Valve Lash Is Excessive
3512C Engine Engine Oil Pan - Disassemble
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250} Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
C8.7 and C12.9 Marine Engines Cylinder Is Noisy
C4.4 Marine Generator Set Magnetic Pickup