3512C Engine Caterpillar


Engine Oil Pan - Assemble

Usage:

3512C GDM

Assembly Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
1P-0808  Multipurpose Grease 


    Illustration 1g03671181

  1. Install suction tube (12) and tube assembly (9).

  2. Install bolts (11) and bolts (10). Tighten bolts (11), and bolts (10) to a torque of 47 ± 9 N·m (35 ± 7 lb ft).

  3. Install bolts (13).


    Illustration 2g03671094

  4. Install connector assembly (7), O-rings, and bolts (8). Apply Tooling (A) to O-rings.


    Illustration 3g03670797

  5. Install cover (2) and O-ring seal (1).

  6. Install drain plug (3) and O-ring seal. Tighten drain plug to a torque of 145 ± 15 N·m (107 ± 11 lb ft).

  7. Install suction screen assembly (4), O-ring seal (5), and adapter (6).

End By:

  1. Install the engine oil pan.

Caterpillar Information System:

3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Fuel Pressure - Gas System
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending Engine Monitoring System
WS063, WSF063 and WSP063 Well Stimulation Pumps Crankshaft (Pump) - Remove and Install
WS063, WSF063 and WSP063 Well Stimulation Pumps Crosshead - Remove and Install
C8.7 and C12.9 Marine Engines Electronic Service Tool Does Not Communicate
C175-16 Petroleum Engines Air Shutoff
C4.4 Marine Generator Set Engine Oil Pan Drain Valve
C4.4 Marine Generator Set Magnetic Pickup
C8.7 and C12.9 Marine Engines Cylinder Is Noisy
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250} Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
3512C Engine Engine Oil Pan - Disassemble
C8.7 and C12.9 Marine Engines Valve Lash Is Excessive
C175-16 Petroleum Engine Component Location
C175-16 Petroleum Engine Configuration Parameters
C175-16 Petroleum Engine Diagnostic Trouble Codes
C175-16 Petroleum Engine Engine Cranks but Does Not Start
C175-16 Petroleum Engine Exhaust Has Excessive White Smoke
SPF343 and SPF343C Trailer Mounted Pumpers Maintenance Interval Schedule
C27 and C32 Generator Sets Fuel System - Prime
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223} New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
374F Excavator Light and Harness - Disconnect and Connect - Rear Work Light
C175-16 Petroleum Generator Set Engines Alarms and Shutoffs
2014/05/30 Clarification of the Exhaust Valve Lash Setting on Certain C13 Truck Engines {1105}
3512C Engine Front Drive Housing - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.