Seal (Crosshead Rod) - Remove and Install
Removal Procedure
Start By:
- Remove the plunger.
- Remove bolts (2) and housing assembly (1) .
Show/hide table
 | |
| Illustration 1 | g03670623 |
- Loosen setscrews (3) and (4) in housing assembly (1) .
Show/hide table
 | |
| Illustration 2 | g03670625 |
- Remove gasket (5) and seals (6) from housing assembly (1) .
Show/hide table
 | |
| Illustration 3 | g03670643 |
Note: Note the orientation of both seals (6) .
Installation Procedure
- Install seals (6) in the reverse order of removal.
Caterpillar Information System:
C8.7 Marine Engine Coolant Level - Check
3512C Engine Engine Oil Cooler - Remove and Install
3512C Engine Water Pump - Remove and Install
WS063, WSF063 and WSP063 Well Stimulation Pumps Flange (Discharge) - Remove and Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Power Train Pressures
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Hydraulic Oil Contamination - Test
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Transmission Planetary Troubleshooting
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Torque Converter Troubleshooting
WS063, WSF063 and WSP063 Well Stimulation Pumps Manifold (Suction) - Remove and Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Speed Sensor (Transmission)
3512C Engine Water Temperature Regulators - Remove and Install
3500 and 3500B Engines Maintenance Interval Schedule - Standby
326F and 330F Excavator Machine Systems Relief Valve (Pilot)
3512C Engine Engine Oil Pump - Remove and Install
3512C Engine Engine Oil Filter Housing - Remove and Install
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Relief Valve (Transmission Hydraulic Control) - Test and Adjust
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Relief Valve (Torque Converter Inlet) Pressure - Test
3512C Engine Engine Oil Pan - Remove and Install
C175-16 Petroleum Engines Engine Oil Pressure - Test
CX31 and CX31 HT On-Highway Transmissions (Cat Truck) Oil Filter (Transmission)
WS063, WSF063 and WSP063 Well Stimulation Pumps Gearbox (Input Drive) - Remove and Install
C8.7 and C12.9 Marine Engines Valve Lash Is Excessive
3512C Engine Engine Oil Pan - Disassemble
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250} Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}