Hood
Usage:
Remove & Install Hood
Start By:
a. remove muffler
1. Remove bolt and clamp (3). Remove two bolts (1) from rear of hood (2).
2. Remove clamp (4) and disconnect intake hose (5).
3. Remove two bolts (6) from the front of hood (2).
4. Use two people to remove hood (2). The weight of the hood is approximately 30 kg (66 lb).
NOTE: Install hood in reverse order.
End By:
a. install muffler
Caterpillar Information System:
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Blower Fans & Motors
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Air Inlet Heater
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Seat
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Turbocharger
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Fan Assembly
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Cab Door Latches And Strikers
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Temperature Control
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Muffler
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Starting Motor (Electric)
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Alternator
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Heater Control Valve
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Heater Core
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Floor Plates
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Engine Compartment Shields
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Oil Filter, Oil Filter Base & Oil Cooler
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Fuel Filter & Fuel Filter Base
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Fuel Shutoff Solenoid
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Fuel Tank
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Radiator Guard
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Radiator
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Radiator Support Assembly
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Fuel Priming Pump And Primary Fuel Filter
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Cab
SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Engine