SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Caterpillar

Show/hide table

Disconnect the batteries before performance of any service work.

1. Disconnect wires (2) from the alternator.

2. Remove nut and wire clip (3).

3. Loosen nuts (1) and bolt (4) and remove belts (5) from the pulley.

4. Remove nuts (1) and bolt (4), then remove the alternator mount bolt and the alternator.

NOTE: Install Alternator in the reverse order. For alternator drive belt tension refer to the Chart in the front of this Manual. When the tension in a V-belt is measured, measure the belt farthest from the engine block. When a replacement of one belt in a V-belt set is necessary, a replacement of the complete set must be made.