SUPPLEMENT FOR 953C TRACK LOADER - 3116 ENGINE Caterpillar

1. Disconnect ground strap (2) and wire (1).

2. Loosen clamp (5).

3. Remove eight bolts (3) and elbow (4) and inlet heater (6).

NOTE: Install in reverse order.

NOTE: Check the condition of the gaskets used between the elbow and the heater, and between the heater and the intake manifold. If the gaskets are damaged in any way they must be replaced.

NOTE: Tighten eight bolts (3) to a torque of

28 ± 7 N·m (21 ± 5 lb ft).