Hydraulic System Oil Sample - Obtain
Show/hide table
 | |
| Illustration 1 | g00684914 |
The hydraulic oil sampling valve is near the pilot filter. Obtain a sample of the hydraulic oil from the hydraulic oil sampling valve that is located on the hydraulic oil filter housing. Refer to Special Publication, SEBU6250, "S·O·S Oil Analysis" for information that pertains to obtaining a sample of the hydraulic oil. Refer to Special Publication, PEHP6001, "How To Take A Good Oil Sample" for more information about obtaining a sample of the hydraulic oil.
Caterpillar Information System:
2003/07/28 Disregard theService Magazine , "Correction to Systems Operation Testing and Adjusting , "Engine Speed Control"" {1931}
SW45 and SW60 Wheel Saws Plate (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Cable (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Guide (Trench Cleaner) - Remove and Install
321C LCR Excavator Machine Systems Drift Reduction Valve (Stick) - Install
321C LCR Excavator Machine Systems Drift Reduction Valve (Stick) - Remove
321C LCR Excavator Machine Systems Drift Reduction Valve (Boom) - Remove
321C LCR Excavator Machine Systems Drift Reduction Valve (Boom) - Install
M322C Excavator Hydraulic System Hydraulic System - Setup - Combined Function Valve
C27 and C32 Generator Set Engines Camshaft Bearings - Install
C27 and C32 Generator Set Engines Camshaft Bearings - Remove
3046 Engine for Caterpillar Built Machines Belt Tension Chart
322C Excavator Safety Messages - Arrangement I
321C LCR Excavator Machine Systems Shuttle Valve - Remove - Auxiliary Control
321C LCR Excavator Machine Systems Shuttle Valve - Install - Auxiliary Control
321C LCR Excavator Machine Systems Swing Motor - Remove
321C LCR Excavator Machine Systems Swing Motor - Install
2003/09/22 Improved Air Cleaner Bracket for the 302.5 and 303.5 Mini Hydraulic Excavator {1051}
SW45 and SW60 Wheel Saws Wheel Saw Drum - Remove and Install
G3500B Engines Engine Protective Devices - Check
SW45 and SW60 Wheel Saws Bearing - Remove and Install
SW45 and SW60 Wheel Saws Control Manifold - Assemble
SW45 and SW60 Wheel Saws Control Manifold - Disassemble
SW45 and SW60 Wheel Saws Control Manifold - Install