Camshaft Bearings - Remove
Show/hide table
Alat yang Diperlukan | |||
---|---|---|---|
Alat | Nomor Suku Cadang | Keterangan Suku Cadang | Jml |
A | 8S-2241 | Grup Alat Bearing Camshaft | 1 |
B | 9U-7222 | Pilot Bearing Camshaft | 1 |
8M-8778 | Stud Pengunci Tirus 1/2 - 13 x 1 9/16 in |
1 | |
C | 9U-7210 | Pelat Alat Penarik | 1 |
Dimulai dengan:
- Lepaskan camshaft. Rujuk ke Pembongkaran dan Pemasangan, "Camshaft - Pelepasan".
Show/hide table
PERHATIAN |
---|
Pastikan semua suku cadang bersih dari kontaminan. Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen. |
- Lepaskan bearing camshaft No. 7 (belakang). Mulailah dari bagian belakang engine ke bagian depan engine.
- Pasang ujung kecil Alat (B) di bearing camshaft (1).
- Letakkan Alat (C) di atas Alat (A). Pasang Alat (A) melalui cylinder head pada Alat (B).
Catatan: Alat (C) dipasang di luar cylinder head. Alat (C) diperlukan untuk melepaskan semua bearing camshaft dari cylinder head.
- Gunakan Alat (A) untuk melepaskan bearing camshaft (1) dari cylinder head.
- Lepaskan Alat (B) dari Alat (A) dan lepaskan bearing camshaft.
Show/hide table
Ilustrasi 1 | g01159745 |
Caterpillar Information System:
3046 Engine for Caterpillar Built Machines Belt Tension Chart
2003/08/01 New Hose Improves the Drainage of Oil from the Turbocharger During a Continuous Prelube Cycle {1052}
2003/08/18 New Sleeve Bearings in the Oscillating Axle Trunnion Support Improve Service Life {3268, 7551}
Circuit Breaker Harness Assembly {1420} Circuit Breaker Harness Assembly {1420}
SW45 and SW60 Wheel Saws Frame (Front) - Remove and Install
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Assemble
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Disassemble
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Install
SW45 and SW60 Wheel Saws Hydraulic Cylinder (Sideshift) - Remove and Install
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Remove
320C Excavator Operation
330B L Excavator, 330B Forest Machine and 330B Material Handler Daily Inspection
C27 and C32 Generator Set Engines Camshaft Bearings - Install
M322C Excavator Hydraulic System Hydraulic System - Setup - Combined Function Valve
321C LCR Excavator Machine Systems Drift Reduction Valve (Boom) - Install
321C LCR Excavator Machine Systems Drift Reduction Valve (Boom) - Remove
321C LCR Excavator Machine Systems Drift Reduction Valve (Stick) - Remove
321C LCR Excavator Machine Systems Drift Reduction Valve (Stick) - Install
SW45 and SW60 Wheel Saws Guide (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Cable (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Plate (Trench Cleaner) - Remove and Install
2003/07/28 Disregard theService Magazine , "Correction to Systems Operation Testing and Adjusting , "Engine Speed Control"" {1931}
325C and 325C L Excavator Hydraulic System Oil Sample - Obtain
322C Excavator Safety Messages - Arrangement I