Bearing - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Pt. No.     | Description     | Qty     |
A     | 5P-4758     | Retaining Ring Pliers As     | 1     |
B     | -     | Air Nozzle with Adapter     | 1     |
C     | 1P-1863     | Retaining Ring Pliers     | 1     |
D     | 1P-0510     | Driver Gp     | 1     |
Start By:
- Remove the wheel saw drum. Refer to the Disassembly and Assembly Manual, "Wheel Saw Drum - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove retaining ring (1) .
Show/hide table
Illustration 1 | g01014878 |
- Remove grease fitting (2) .
Show/hide table
Illustration 2 | g01014884 |
- Use Tooling (B) with pressure air at 310 kPa (45 psi) in order to remove cover assembly (3). Remove the O-ring seal from cover assembly (3) .
Show/hide table
Illustration 3 | g01014903 |
- Use Tooling (C) to remove retaining ring (4) .
Show/hide table
Illustration 4 | g01014905 |
- Remove spacer (5) .
Show/hide table
Illustration 5 | g01014947 |
- Remove housing assembly (6) .
- Use Tooling (D) and a press in order to remove bearing (7). Remove shaft seal (8) .
Show/hide table
Illustration 6 | g01014961 |
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Pt. No.     | Description     | Qty     |
A     | 5P-4758     | Retaining Ring Pliers As     | 1     |
C     | 1P-1863     | Retaining Ring Pliers     | 1     |
D     | 1P-0510     | Driver Gp     | 1     |
Note: Inspect all O-ring seals for wear or for damage. Replace the components, if necessary.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install shaft seal (8) in housing assembly (6) .
Show/hide table
Illustration 7 | g01015176 |
- Use Tooling (D) and a press to install bearing (7) in housing assembly (6) .
- Install spacer (5) in housing assembly (6) .
Show/hide table
Illustration 8 | g01014947 |
- Use Tooling (C) to install retaining ring (4) .
Show/hide table
Illustration 9 | g01014905 |
- Install the O-ring seal on cover (3). Install cover (3) in housing assembly (6) .
Show/hide table
Illustration 10 | g01015128 |
- Use Tooling (A) to install retaining ring (1) .
- Install grease fitting (2) .
End By: Install the wheel saw drum. Refer to the Disassembly and Assembly Manual, "Wheel Saw Drum - Remove and Install".
Caterpillar Information System:
G3500B Engines Engine Protective Devices - Check
SW45 and SW60 Wheel Saws Wheel Saw Drum - Remove and Install
2003/09/22 Improved Air Cleaner Bracket for the 302.5 and 303.5 Mini Hydraulic Excavator {1051}
321C LCR Excavator Machine Systems Swing Motor - Install
321C LCR Excavator Machine Systems Swing Motor - Remove
321C LCR Excavator Machine Systems Shuttle Valve - Install - Auxiliary Control
321C LCR Excavator Machine Systems Shuttle Valve - Remove - Auxiliary Control
322C Excavator Safety Messages - Arrangement I
325C and 325C L Excavator Hydraulic System Oil Sample - Obtain
2003/07/28 Disregard theService Magazine , "Correction to Systems Operation Testing and Adjusting , "Engine Speed Control"" {1931}
SW45 and SW60 Wheel Saws Plate (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Cable (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Control Manifold - Assemble
SW45 and SW60 Wheel Saws Control Manifold - Disassemble
SW45 and SW60 Wheel Saws Control Manifold - Install
SW45 and SW60 Wheel Saws Control Manifold - Remove
325D and 329D Excavators and 325D Material Handler Machine System Specifications Track
330C Material Handler Operation
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Remove
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit Diagnostic Codes
330C Forest Machine Machine System Specifications Track
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Install
345B Series II Material Handler Hydraulic System Oil Sample - Obtain
345B Series II Material Handler Swing Drive Oil Sample - Obtain