Wheel Saw Drum - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Pt. No.     | Description     | Qty     |
A     | 169-6969     | Stud (M16 X 2 X 300 mm)     | 1     |
B     | 138-7575     | Link Bracket     | 2     |
C     | 138-7574     | Link Bracket     | 1     |
Start By:
- Remove the front frame assembly. Refer to the Disassembly and Assembly Manual, "Frame (Front) - Remove and Install" for the removal procedure.
- Position the work tool on blocks.
Show/hide table
Illustration 1 | g01014690 |
- Remove nuts (1) .
Show/hide table
Illustration 2 | g01014693 |
- Loosen bolts (2) by five turns.
Show/hide table
Illustration 3 | g01014694 |
- Remove bolts (3) and (4) from piston motor (5) .
- Attach Tooling (A) and a suitable lifting device to piston motor (5). Piston motor (5) weighs approximately 91 kg (200 lb).
Show/hide table
Illustration 4 | g01014696 |
- Install Tooling (B). Remove bolts (2) and piston motor (5) .
- Attach Tooling (C) and a suitable lifting device to wheel drum (7). The wheel drum weighs approximately 590 kg (1300 lb).
Show/hide table
Illustration 5 | g01014698 |
- Remove bolts (6) .
- Remove wheel drum (7) .
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Pt. No.     | Description     | Qty     |
A     | 169-6969     | Stud (M16 X 2 X 300 mm)     | 1     |
B     | 138-7575     | Link Bracket     | 2     |
C     | 138-7574     | Link Bracket     | 1     |
- Attach Tooling (A) and a suitable lifting device to wheel drum (7). The wheel drum weighs approximately 590 kg (1300 lb).
Show/hide table
Illustration 6 | g01014698 |
- Place wheel drum (7) in position on the work tool.
- Install bolts (6) .
- Attach Tooling (A) and a suitable lifting device to piston motor (5). Piston motor (5) weighs approximately 91 kg (200 lb).
Show/hide table
Illustration 7 | g01014696 |
- Install Tooling (B) and piston motor (5) .
- Install bolts (2), (3), and (4) in order to fasten piston motor (5) .
Show/hide table
Illustration 8 | g01014694 |
- Install nuts (1) .
Show/hide table
Illustration 9 | g01014693 |
End By: Install the front frame assembly. Refer to the Disassembly and Assembly Manual, "Frame (Front) - Remove and Install".
Caterpillar Information System:
2003/09/22 Improved Air Cleaner Bracket for the 302.5 and 303.5 Mini Hydraulic Excavator {1051}
321C LCR Excavator Machine Systems Swing Motor - Install
321C LCR Excavator Machine Systems Swing Motor - Remove
321C LCR Excavator Machine Systems Shuttle Valve - Install - Auxiliary Control
321C LCR Excavator Machine Systems Shuttle Valve - Remove - Auxiliary Control
322C Excavator Safety Messages - Arrangement I
325C and 325C L Excavator Hydraulic System Oil Sample - Obtain
2003/07/28 Disregard theService Magazine , "Correction to Systems Operation Testing and Adjusting , "Engine Speed Control"" {1931}
SW45 and SW60 Wheel Saws Plate (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Cable (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Guide (Trench Cleaner) - Remove and Install
321C LCR Excavator Machine Systems Drift Reduction Valve (Stick) - Install
G3500B Engines Engine Protective Devices - Check
SW45 and SW60 Wheel Saws Bearing - Remove and Install
SW45 and SW60 Wheel Saws Control Manifold - Assemble
SW45 and SW60 Wheel Saws Control Manifold - Disassemble
SW45 and SW60 Wheel Saws Control Manifold - Install
SW45 and SW60 Wheel Saws Control Manifold - Remove
325D and 329D Excavators and 325D Material Handler Machine System Specifications Track
330C Material Handler Operation
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Remove
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit Diagnostic Codes
330C Forest Machine Machine System Specifications Track
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Install