3046 Engine for Caterpillar Built Machines Caterpillar


Belt Tension Chart

Usage:

D4C III 1FW
Note: Do not use the belt tension chart for belts with tensioners that are spring loaded.

Table 1
Belt Tension Chart    
Belt Type     Deflection     Applied Force for Specified Deflection    
Type B    
10 to 12 mm (0.4 to 0.6 inch)    

98 N (22 lb)    

Caterpillar Information System:

2003/08/01 New Hose Improves the Drainage of Oil from the Turbocharger During a Continuous Prelube Cycle {1052}
2003/08/18 New Sleeve Bearings in the Oscillating Axle Trunnion Support Improve Service Life {3268, 7551}
Circuit Breaker Harness Assembly {1420} Circuit Breaker Harness Assembly {1420}
SW45 and SW60 Wheel Saws Frame (Front) - Remove and Install
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Assemble
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Disassemble
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Install
SW45 and SW60 Wheel Saws Hydraulic Cylinder (Sideshift) - Remove and Install
321C LCR Excavator Machine Systems Control Manifold (Pilot Oil) - Remove
320C Excavator Operation
330B L Excavator, 330B Forest Machine and 330B Material Handler Daily Inspection
330C Excavator Daily Inspection
C27 and C32 Generator Set Engines Camshaft Bearings - Remove
C27 and C32 Generator Set Engines Camshaft Bearings - Install
M322C Excavator Hydraulic System Hydraulic System - Setup - Combined Function Valve
321C LCR Excavator Machine Systems Drift Reduction Valve (Boom) - Install
321C LCR Excavator Machine Systems Drift Reduction Valve (Boom) - Remove
321C LCR Excavator Machine Systems Drift Reduction Valve (Stick) - Remove
321C LCR Excavator Machine Systems Drift Reduction Valve (Stick) - Install
SW45 and SW60 Wheel Saws Guide (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Cable (Trench Cleaner) - Remove and Install
SW45 and SW60 Wheel Saws Plate (Trench Cleaner) - Remove and Install
2003/07/28 Disregard theService Magazine , "Correction to Systems Operation Testing and Adjusting , "Engine Speed Control"" {1931}
325C and 325C L Excavator Hydraulic System Oil Sample - Obtain
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.