Control Manifold - Disassemble
Disassembly Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove plug (1) from the cartridge assembly.
Show/hide table
Illustration 1 | g01015460 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove spring (2) .
Show/hide table
Illustration 2 | g01020330 |
- Remove plug (3) .
Show/hide table
Illustration 3 | g01015463 |
- Remove the housing (4) for the cartridge assembly.
Show/hide table
Illustration 4 | g01016297 |
- Remove spool (5) .
Show/hide table
Illustration 5 | g01016302 |
- Repeat Steps 1 through 5 for the remaining cartridge assembly.
- Remove connectors (6) and manifold (7) .
Show/hide table
Illustration 6 | g01016312 |
- Remove connectors (8) .
Show/hide table
Illustration 7 | g01016316 |
- Remove bolts (9) .
Show/hide table
Illustration 8 | g01016337 |
- Separate diverter valve groups (10) and remove the O-ring seals.
Show/hide table
Illustration 9 | g01016350 |
- Remove connectors (11) and (12) .
Show/hide table
Illustration 10 | g01016357 |
- Remove plug (13) .
Show/hide table
Illustration 11 | g01016395 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove spring (14) and spool (15) .
Show/hide table
Illustration 12 | g01016397 |
Show/hide table
Illustration 13 | g01016399 |
- Remove cap (16) .
Show/hide table
Illustration 14 | g01016413 |
- Remove the O-ring seal (17) and solenoid (18) .
Show/hide table
Illustration 15 | g01016414 |
- Remove O-ring seal (19) and cartridge assembly (20) .
Show/hide table
Illustration 16 | g01016490 |
- Remove piston (21) from cartridge assembly (20) .
Show/hide table
Illustration 17 | g01016548 |
- Repeat Steps 11 through 17 for the remaining diverter valve group.
Caterpillar Information System:
SW45 and SW60 Wheel Saws Control Manifold - Assemble
SW45 and SW60 Wheel Saws Bearing - Remove and Install
G3500B Engines Engine Protective Devices - Check
SW45 and SW60 Wheel Saws Wheel Saw Drum - Remove and Install
2003/09/22 Improved Air Cleaner Bracket for the 302.5 and 303.5 Mini Hydraulic Excavator {1051}
321C LCR Excavator Machine Systems Swing Motor - Install
321C LCR Excavator Machine Systems Swing Motor - Remove
321C LCR Excavator Machine Systems Shuttle Valve - Install - Auxiliary Control
321C LCR Excavator Machine Systems Shuttle Valve - Remove - Auxiliary Control
322C Excavator Safety Messages - Arrangement I
325C and 325C L Excavator Hydraulic System Oil Sample - Obtain
2003/07/28 Disregard theService Magazine , "Correction to Systems Operation Testing and Adjusting , "Engine Speed Control"" {1931}
SW45 and SW60 Wheel Saws Control Manifold - Install
SW45 and SW60 Wheel Saws Control Manifold - Remove
325D and 329D Excavators and 325D Material Handler Machine System Specifications Track
330C Material Handler Operation
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Remove
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit Diagnostic Codes
330C Forest Machine Machine System Specifications Track
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Install
345B Series II Material Handler Hydraulic System Oil Sample - Obtain
345B Series II Material Handler Swing Drive Oil Sample - Obtain
345B Series II Material Handler Engine Oil Sample - Obtain
345B Series II Material Handler Maintenance Interval Schedule