Usage:
1. Disconnect control cable from lever (1). Remove cable clamp mounting bolt (2).
2. Disconnect wiring from overspeed switch (7).
3. Remove oil temperature line (3) and disconnect oil pressure line (6).
4. Remove pin from collar (4). Remove clamp mounting bolt (5).
5. Remove retaining bolts from mounting bracket (9).
6. Remove mounting bolts (8) from fuel injection pump housing.
7. Remove safety shutoff and overspeed assembly.
Install Safety Shutoff And Overspeed Assembly
1. Position safety shutoff and overspeed assembly (1) on fuel injection pump housing and install mounting bolts.
2. Install mounting bracket retaining bolts.
3. Connect control cable to collar and install pin.
4. Connect oil pressure line. Install oil temperature line.
5. Connect wiring to overspeed switch.
6. Connect control cable to lever and install the mounting bolts for the two clamps.