Crankshaft Front Seal
Usage:
Remove Crankshaft Front Seal
preparatory step:
a) remove vibration damper and hub
1. Using puller group (A), remove the crankshaft front seal.
Install Crankshaft Front Seal
1. Using tool setup (A), install the crankshaft front seal as follows.
2. Lubricate the lip of seal and the crankshaft with clean SAE 30 engine oil. Clean the surface being sealed. Position the seal on crankshaft with lip of seal toward rear of engine.
3. Install the locator assembly and three retaining screws.
4. Position the seal ring installer on the locator assembly.
5. Install the pusher plate and nut. Tighten the nut until pusher plate becomes solid against the locator assembly.
6. Remove the tool setup (A).
concluding step:
a) install vibration damper and hub
Caterpillar Information System:
D349 INDUSTRIAL & MARINE ENGINES Vibration Damper & Hub
D349 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
D349 INDUSTRIAL & MARINE ENGINES Water Temperature Regulators
D349 INDUSTRIAL & MARINE ENGINES Oil Filter Housing
D349 INDUSTRIAL & MARINE ENGINES Fuel Filter Housing
D349 INDUSTRIAL & MARINE ENGINES Expansion Tank
D349 INDUSTRIAL & MARINE ENGINES Crankshaft Main Bearings
D349 INDUSTRIAL & MARINE ENGINES Oil Pump
D349 INDUSTRIAL & MARINE ENGINES Oil Pan Base
D349 INDUSTRIAL & MARINE ENGINES Piston Cooling Tubes
D349 INDUSTRIAL & MARINE ENGINES Connecting Rod Bearings
D349 INDUSTRIAL & MARINE ENGINES Prelube Oil Pump
D349 INDUSTRIAL & MARINE ENGINES Front Timing Gear Cover
D349 INDUSTRIAL & MARINE ENGINES Front Timing Gears & Plate
D349 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
D349 INDUSTRIAL & MARINE ENGINES Fuel Ratio Control
D349 INDUSTRIAL & MARINE ENGINES Safety Shutoff & Overspeed Assembly
D349 INDUSTRIAL & MARINE ENGINES Governor
D349 INDUSTRIAL & MARINE ENGINES Variable Timing Unit
D349 INDUSTRIAL & MARINE ENGINES Aftercooler Housings
D349 INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
D349 INDUSTRIAL & MARINE ENGINES Fuel Inj. Pump Housing & Governor
D349 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump Housing
D349 INDUSTRIAL & MARINE ENGINES Aftercooler Cores