Flywheel
Usage:
Remove Flywheel
1. Install two 1/2" -13NC forged eyebolts in the flywheel and attach a hoist.
2. Remove the flywheel retaining bolts. Remove the flywheel-weight 300 lbs. (136 kg).
Install Flywheel
1. Install two 1/2" -13NC forged eyebolts in the flywheel.
2. Attach a hoist and position the flywheel on engine with hole in flywheel aligned with dowel pin in crankshaft.
3. Install the flywheel retaining bolts. Remove the hoist and eyebolts.
Caterpillar Information System:
DISASSEMBLY AND ASSEMBLY D346 Air Compressor
DISASSEMBLY AND ASSEMBLY D346 Cylinder Liners
DISASSEMBLY AND ASSEMBLY D346 Pistons
DISASSEMBLY AND ASSEMBLY D346 Spacer Plates
DISASSEMBLY AND ASSEMBLY D346 Cylinder Head Assembly
DISASSEMBLY AND ASSEMBLY D346 Camshaft Housings
DISASSEMBLY AND ASSEMBLY D346 Precombustion Chambers
DISASSEMBLY AND ASSEMBLY D346 Glow Plugs
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Valves
DISASSEMBLY AND ASSEMBLY D346 Valve Covers
DISASSEMBLY AND ASSEMBLY D346 Aftercooler Cores
DISASSEMBLY AND ASSEMBLY D346 Turbochargers
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Rear Seal Ring & Thrower
DISASSEMBLY AND ASSEMBLY D346 Flywheel Housing
DISASSEMBLY AND ASSEMBLY D346 Rear Timing Gears And Plate
DISASSEMBLY AND ASSEMBLY D346 Crankshaft
D343 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
D343 INDUSTRIAL & MARINE ENGINES Fuel Filter Housing
D343 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
D343 INDUSTRIAL & MARINE ENGINES Fuel Ratio Control
D343 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump & Governor
D343 INDUSTRIAL & MARINE ENGINES Governor
D343 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump
D343 INDUSTRIAL & MARINE ENGINES Variable Timing Unit