Exhaust Manifolds
Usage:
Remove Exhaust Manifolds
preparatory step:
a) remove air compressor (right exhaust manifold only)
1. Remove the four exhaust manifold-to-turbocharger inlet pipe mounting bolts and nuts.
2. Remove the exhaust manifold retaining nuts, washers and locks. Remove the exhaust manifold-weight 40 lbs. (18 kg).
Install Exhaust Manifolds
1. Coat the threads of the exhaust manifold retaining studs with 9M3710 Anti-Seize Compound.
2. Position the exhaust manifold on engine and install the retaining nuts, washers and locks.
3. Install the exhaust manifold-to-turbocharger inlet pipe mounting bolts and nuts.
concluding step:
a) install air compressor
Caterpillar Information System:
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Pump Housing
DISASSEMBLY AND ASSEMBLY D346 Variable Timing Unit
DISASSEMBLY AND ASSEMBLY D346 Governor
DISASSEMBLY AND ASSEMBLY D346 Fuel Ratio Control
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Lines
DISASSEMBLY AND ASSEMBLY D346 Fuel Filter Housing
DISASSEMBLY AND ASSEMBLY D346 Fuel Filter Elements
DISASSEMBLY AND ASSEMBLY D346 Fuel Transfer Pump
DISASSEMBLY AND ASSEMBLY D346 Fuel Priming Pump
DISASSEMBLY AND ASSEMBLY D346 Front Timing Gear Cover
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Front Seal
DISASSEMBLY AND ASSEMBLY D346 Vibration Damper And Pulley
DISASSEMBLY AND ASSEMBLY D346 Turbochargers
DISASSEMBLY AND ASSEMBLY D346 Aftercooler Cores
DISASSEMBLY AND ASSEMBLY D346 Valve Covers
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Valves
DISASSEMBLY AND ASSEMBLY D346 Glow Plugs
DISASSEMBLY AND ASSEMBLY D346 Precombustion Chambers
DISASSEMBLY AND ASSEMBLY D346 Camshaft Housings
DISASSEMBLY AND ASSEMBLY D346 Cylinder Head Assembly
DISASSEMBLY AND ASSEMBLY D346 Spacer Plates
DISASSEMBLY AND ASSEMBLY D346 Pistons
DISASSEMBLY AND ASSEMBLY D346 Cylinder Liners
DISASSEMBLY AND ASSEMBLY D346 Air Compressor