Fuel Priming Pump
Usage:
Remove Fuel Priming Pump
1. Remove the two retaining bolts.
2. Remove the fuel priming pump (1).
Install Fuel Priming Pump
1. Position the fuel priming pump on fuel filter housing.
2. Install retaining bolts.
Disassemble Fuel Priming Pump
preparatory step:
a) remove fuel priming pump
1. Press in on pins (1) and pull rod assembly out of barrel. Remove the pins and springs.
2. Drive out handle retaining pin and remove the handle, cap (2) and spring (3). Remove the seal from cap.
3. Remove seal and ring from rod.
Assemble Fuel Priming Pump
1. Install seal and ring on rod.
2. Install seal on cap. Position spring, cap and handle on rod assembly. Install retaining pin.
3. Lubricate bore of the barrel lightly with clean engine oil.
4. Position pins and springs in cap and install the rod assembly in barrel.
concluding step:
a) install fuel priming pump
Caterpillar Information System:
DISASSEMBLY AND ASSEMBLY D346 Front Timing Gear Cover
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Front Seal
DISASSEMBLY AND ASSEMBLY D346 Vibration Damper And Pulley
DISASSEMBLY AND ASSEMBLY D346 Water Temp. Regulators
DISASSEMBLY AND ASSEMBLY D346 Aftercooler Water Pump
DISASSEMBLY AND ASSEMBLY D346 (Later Engine)
DISASSEMBLY AND ASSEMBLY D346 Water Pump
DISASSEMBLY AND ASSEMBLY D346 Piston Cooling Jets
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Main Bearings
DISASSEMBLY AND ASSEMBLY D346 Connecting Rod Bearings
DISASSEMBLY AND ASSEMBLY D346 Oil Pump
DISASSEMBLY AND ASSEMBLY D346 Oil Pan
DISASSEMBLY AND ASSEMBLY D346 Fuel Transfer Pump
DISASSEMBLY AND ASSEMBLY D346 Fuel Filter Elements
DISASSEMBLY AND ASSEMBLY D346 Fuel Filter Housing
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Lines
DISASSEMBLY AND ASSEMBLY D346 Fuel Ratio Control
DISASSEMBLY AND ASSEMBLY D346 Governor
DISASSEMBLY AND ASSEMBLY D346 Variable Timing Unit
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Pump Housing
DISASSEMBLY AND ASSEMBLY D346 Exhaust Manifolds
DISASSEMBLY AND ASSEMBLY D346 Turbochargers
DISASSEMBLY AND ASSEMBLY D346 Aftercooler Cores
DISASSEMBLY AND ASSEMBLY D346 Valve Covers