Fuel Filter Elements
Usage:
Remove Fuel Filter Elements
1. Close the fuel supply valve.
2. Use a strap wrench (A) to remove each fuel filter.
Install Fuel Filter Elements
1. Clean the filter base and apply a light coat of fuel to the filter gasket.
2. Fill the filter with clean diesel fuel.
3. Install the filter until the gasket touches the filter base, then give an additional 1/2 turn.
Caterpillar Information System:
DISASSEMBLY AND ASSEMBLY D346 Fuel Transfer Pump
DISASSEMBLY AND ASSEMBLY D346 Fuel Priming Pump
DISASSEMBLY AND ASSEMBLY D346 Front Timing Gear Cover
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Front Seal
DISASSEMBLY AND ASSEMBLY D346 Vibration Damper And Pulley
DISASSEMBLY AND ASSEMBLY D346 Water Temp. Regulators
DISASSEMBLY AND ASSEMBLY D346 Aftercooler Water Pump
DISASSEMBLY AND ASSEMBLY D346 (Later Engine)
DISASSEMBLY AND ASSEMBLY D346 Water Pump
DISASSEMBLY AND ASSEMBLY D346 Piston Cooling Jets
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Main Bearings
DISASSEMBLY AND ASSEMBLY D346 Connecting Rod Bearings
DISASSEMBLY AND ASSEMBLY D346 Fuel Filter Housing
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Lines
DISASSEMBLY AND ASSEMBLY D346 Fuel Ratio Control
DISASSEMBLY AND ASSEMBLY D346 Governor
DISASSEMBLY AND ASSEMBLY D346 Variable Timing Unit
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Pump Housing
DISASSEMBLY AND ASSEMBLY D346 Exhaust Manifolds
DISASSEMBLY AND ASSEMBLY D346 Turbochargers
DISASSEMBLY AND ASSEMBLY D346 Aftercooler Cores
DISASSEMBLY AND ASSEMBLY D346 Valve Covers
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Valves
DISASSEMBLY AND ASSEMBLY D346 Glow Plugs