Fuel Injection Lines
Usage:
Install Fuel Injection Lines
1. Remove the caps and plugs from lines and openings.
2. Position the fuel injection lines on engine.
3. Connect lines to fuel injection pump housing and to camshaft housing. Tighten the retaining nuts (2) to 30 ± 5 lb. ft. (4,1 ± 0,7 mkg).
4. Install the fuel injection line retaining clips and mounting bolts.
Caterpillar Information System:
DISASSEMBLY AND ASSEMBLY D346 Fuel Filter Housing
DISASSEMBLY AND ASSEMBLY D346 Fuel Filter Elements
DISASSEMBLY AND ASSEMBLY D346 Fuel Transfer Pump
DISASSEMBLY AND ASSEMBLY D346 Fuel Priming Pump
DISASSEMBLY AND ASSEMBLY D346 Front Timing Gear Cover
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Front Seal
DISASSEMBLY AND ASSEMBLY D346 Vibration Damper And Pulley
DISASSEMBLY AND ASSEMBLY D346 Water Temp. Regulators
DISASSEMBLY AND ASSEMBLY D346 Aftercooler Water Pump
DISASSEMBLY AND ASSEMBLY D346 (Later Engine)
DISASSEMBLY AND ASSEMBLY D346 Water Pump
DISASSEMBLY AND ASSEMBLY D346 Piston Cooling Jets
DISASSEMBLY AND ASSEMBLY D346 Fuel Ratio Control
DISASSEMBLY AND ASSEMBLY D346 Governor
DISASSEMBLY AND ASSEMBLY D346 Variable Timing Unit
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Pump Housing
DISASSEMBLY AND ASSEMBLY D346 Exhaust Manifolds
DISASSEMBLY AND ASSEMBLY D346 Turbochargers
DISASSEMBLY AND ASSEMBLY D346 Aftercooler Cores
DISASSEMBLY AND ASSEMBLY D346 Valve Covers
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Valves
DISASSEMBLY AND ASSEMBLY D346 Glow Plugs
DISASSEMBLY AND ASSEMBLY D346 Precombustion Chambers
DISASSEMBLY AND ASSEMBLY D346 Camshaft Housings