Vibration Damper And Pulley
Usage:
Remove Vibration Damper And Pulley
1. Remove the vibration damper retaining bolts, lockwashers and retainer. Reinstall the retainer and bolts with a suitable spacer (1) between the crankshaft and retainer. Tighten the retaining bolts.
2. Install tool setup (A) and separate the vibration damper and pulley from the crankshaft.
3. Remove the tool setup and attach a hoist to the pulley. Remove the retainer, bolts and spacer. Remove the vibration damper and pulley as a unit-weight 150 lbs. (68 kg).
Install Vibration Damper And Pulley
1. Attach a hoist and position the vibration damper and pulley on the crankshaft.
2. Install the retainer, lockwashers and bolts. Tighten the retaining bolts to 130 ± 12 lb. ft. (18,0 ± 1,7 mkg). Tap the retaining bolts with a hammer and retighten to the above torque.
Caterpillar Information System:
DISASSEMBLY AND ASSEMBLY D346 Water Temp. Regulators
DISASSEMBLY AND ASSEMBLY D346 Aftercooler Water Pump
DISASSEMBLY AND ASSEMBLY D346 (Later Engine)
DISASSEMBLY AND ASSEMBLY D346 Water Pump
DISASSEMBLY AND ASSEMBLY D346 Piston Cooling Jets
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Main Bearings
DISASSEMBLY AND ASSEMBLY D346 Connecting Rod Bearings
DISASSEMBLY AND ASSEMBLY D346 Oil Pump
DISASSEMBLY AND ASSEMBLY D346 Oil Pan
DISASSEMBLY AND ASSEMBLY D346 Oil Filter Base
DISASSEMBLY AND ASSEMBLY D346 Oil Cooler
DISASSEMBLY AND ASSEMBLY D346 Filter Elements
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Front Seal
DISASSEMBLY AND ASSEMBLY D346 Front Timing Gear Cover
DISASSEMBLY AND ASSEMBLY D346 Fuel Priming Pump
DISASSEMBLY AND ASSEMBLY D346 Fuel Transfer Pump
DISASSEMBLY AND ASSEMBLY D346 Fuel Filter Elements
DISASSEMBLY AND ASSEMBLY D346 Fuel Filter Housing
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Lines
DISASSEMBLY AND ASSEMBLY D346 Fuel Ratio Control
DISASSEMBLY AND ASSEMBLY D346 Governor
DISASSEMBLY AND ASSEMBLY D346 Variable Timing Unit
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Pump Housing
DISASSEMBLY AND ASSEMBLY D346 Exhaust Manifolds