Air Compressor
Usage:
Remove Air Compressor
1. Drain the cooling system.
2. Disconnect all air, water and oil lines from the air compressor.
3. Attach a hoist to the air compressor. Remove the three retaining nuts. Remove the air compressor-weight 50 lbs. (23 kg).
Install Air Compressor
1. Attach a hoist and position the air compressor on the engine. Install the retaining nuts.
2. Connect all air, water and oil lines to the air compressor.
3. Fill the cooling system.
Caterpillar Information System:
DISASSEMBLY AND ASSEMBLY D346 Cylinder Liners
DISASSEMBLY AND ASSEMBLY D346 Pistons
DISASSEMBLY AND ASSEMBLY D346 Spacer Plates
DISASSEMBLY AND ASSEMBLY D346 Cylinder Head Assembly
DISASSEMBLY AND ASSEMBLY D346 Camshaft Housings
DISASSEMBLY AND ASSEMBLY D346 Precombustion Chambers
DISASSEMBLY AND ASSEMBLY D346 Glow Plugs
DISASSEMBLY AND ASSEMBLY D346 Fuel Injection Valves
DISASSEMBLY AND ASSEMBLY D346 Valve Covers
DISASSEMBLY AND ASSEMBLY D346 Aftercooler Cores
DISASSEMBLY AND ASSEMBLY D346 Turbochargers
DISASSEMBLY AND ASSEMBLY D346 Exhaust Manifolds
DISASSEMBLY AND ASSEMBLY D346 Flywheel
DISASSEMBLY AND ASSEMBLY D346 Crankshaft Rear Seal Ring & Thrower
DISASSEMBLY AND ASSEMBLY D346 Flywheel Housing
DISASSEMBLY AND ASSEMBLY D346 Rear Timing Gears And Plate
DISASSEMBLY AND ASSEMBLY D346 Crankshaft
D343 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
D343 INDUSTRIAL & MARINE ENGINES Fuel Filter Housing
D343 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
D343 INDUSTRIAL & MARINE ENGINES Fuel Ratio Control
D343 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump & Governor
D343 INDUSTRIAL & MARINE ENGINES Governor
D343 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump