Usage:
preparatory step:
a) remove oil filter elements
1. Drain the engine crankcase-capacity 15 U.S. Gal. (57 liter). Drain the cooling system and oil cooler.
2. Disconnect vent tube (1) and remove the oil filler pipe (2).
3. Remove oil lines (3).
4. Disconnect the vent line (4) from oil cooler inlet pipe to cylinder block.
5. Disconnect oil cooler inlet line (5).
6. Remove the oil cooler-to-oil filter base mounting nuts (6). Remove the oil cooler-weight 80 lbs. (36 kg).
Install Oil Cooler
1. Position the oil cooler to the engine and install mounting nuts.
2. Install oil cooler inlet line.
3. Install vent line from oil cooler inlet pipe to cylinder block.
4. Install the oil filter base inlet and outlet oil lines.
5. Install the oil filter pipe and connect the vent tube.
6. Fill the cooling system and engine crankcase.
concluding step:
a) install oil filter elements
Disassemble Oil Cooler
preparatory step:
a) remove oil cooler
1. Remove the two O-ring seals from cooler.
2. Remove the two drain plugs and washers.
3. Remove the oil cooler inlet and outlet bonnets.
Assemble Oil Cooler
1. Install the inlet and outlet bonnets.
2. Install the drain plugs and washers.
3. Install the O-ring seals.
concluding step:
a) install oil cooler