Exhaust Manifolds
Usage:
Remove Exhaust Manifolds
1. Remove the exhaust manifold-to-elbow retaining bolts and nuts (1).
2. Remove the exhaust manifold retaining nuts, locks and washers.
3. Remove the exhaust manifold - weight 40 lbs. (18 kg).
4. Remove the exhaust manifold gaskets.
Install Exhaust Manifolds
1. Coat the threads of the exhaust manifold retaining studs with 9M3710 Anti-Seize Compound.
2. Install new exhaust manifold gaskets.
3. Position the exhaust manifold on engine and install the retaining nuts, washers and locks.
4. Coat the threads of exhaust manifold-to-elbow retaining bolts with 9M3710 Anti-Seize Compound.
5. Install manifold-to-elbow gasket, retaining nuts, and bolts.
Caterpillar Information System:
D346 INDUSTRIAL ENGINE Fuel Injection Pump Housing
D346 INDUSTRIAL ENGINE Variable Timing Unit
D346 INDUSTRIAL ENGINE Governor
D346 INDUSTRIAL ENGINE Fuel Ratio Control With Override
D346 INDUSTRIAL ENGINE Safety Shutoff Control
D346 INDUSTRIAL ENGINE Fuel Injection Lines
D346 INDUSTRIAL ENGINE Fuel Transfer Pump
D346 INDUSTRIAL ENGINE Front Timing Gear Plate And Camshaft Drive Idler Gear
D346 INDUSTRIAL ENGINE Front Balancer And Idler Gear
D346 INDUSTRIAL ENGINE Front Timing Gear Cover
D346 INDUSTRIAL ENGINE Crankshaft Front Seal
D346 INDUSTRIAL ENGINE Vibration Damper And Hub
D346 INDUSTRIAL ENGINE Air Cleaner Housings
D346 INDUSTRIAL ENGINE Turbochargers
D346 INDUSTRIAL ENGINE Aftercooler Cores
D346 INDUSTRIAL ENGINE Valve Covers
D346 INDUSTRIAL ENGINE Fuel Injection Valves
D346 INDUSTRIAL ENGINE Precombustion Chambers
D346 INDUSTRIAL ENGINE Right Camshaft Housing
D346 INDUSTRIAL ENGINE Left Camshaft Housing
D346 INDUSTRIAL ENGINE Right Cylinder Head Assembly
D346 INDUSTRIAL ENGINE Left Cylinder Head Assembly
D346 INDUSTRIAL ENGINE Spacer Plates
D346 INDUSTRIAL ENGINE Pistons