Pressure Sensor (Brake Charging)
Show/hide table
 | |
| Illustration 1 | g00904362 |
(1) Torque for installing the pressure sensor ... 20 ± 2 N·m (15 ± 1.5 lb ft)
Maximum operating oil pressure for the pressure sensor ... 34500 kPa (5000 psi)
Supply voltage for the pressure sensor ... 5.0 ± 0.25 VDC
Maximum input current for the pressure sensor ... 10 mA
Maximum output current for the pressure sensor ... 1.5 mA
Accuracy of maximum pressure at -40 °C (-40 °F) to 0 °C (32 °F) ... ± 3 %
Accuracy of maximum pressure at 0 °C (32 °F) to 100 °C (212 °F) ... ± 1 %
Accuracy of maximum pressure at 100 °C (212 °F) to 120 °C (248 °F) ... ± 1.5 %
(A) Supply voltage
(B) Ground
(C) Signal
Caterpillar Information System:
CB-434C Vibratory Compactor Hydraulic System Oil Filter - Replace
R1600 Load Haul Dump Machine Electrical System Electrical Power Supply
R1600 Load Haul Dump Machine Electrical System General Information
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
3126B Engine for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Articulating and Oscillating Hitch
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Piston and Rings
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0444 - FMI 04
CB-434C Vibratory Compactor Hydraulic System Oil - Change
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Connecting Rod
2002/07/22 Special Instruction, REHS1115, "Procedure for the Installation of a Separate Brake Pump" {3108, 5056, 5070, 7306}
CB-434C Vibratory Compactor Fuses - Replace
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Limit Switch (Parking Brake)
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0490 - FMI 02
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Brake and Planetary
2002/11/18 New Adapters for the Shaw Aero Fast Fill Fuel Systems {1273, 1274, 1710}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Solenoid Valve (Demand Fan)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Parking Brake
2002/07/08 Special Instruction, REHS1022 , "Modification Procedure for Moving the Color Markng System from the Stick to the Harvester Head" is Available {6393}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Pressure Sensor (Brake Oil)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Solenoid Valve (Brake Charging)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Solenoid Valve (Reversing Fan)
Computer Aided Bucking System (CABSWin/CABSDos) System Configuration (HH300/HH500/HH700) - CABSWin
3126B Engine for 570B and 580B Wheel Harvesters Diagnostic Codes