Solenoid Valve (Demand Fan)
Show/hide table
 | |
| Illustration 1 | g00904516 |
(1) Torque for the solenoid valve ... 25.5 ± 1.5 N·m (18.8 ± 1.1 lb ft)
(2) Torque for the nut ... 6.5 ± 0.5 N·m (58 ± 4 lb in)
(3) 224-5846 Coil
- Nominal coil voltage ... 24 VDC
- Current for the coil at 121 °C (250 °F) ... 1 Amp
- Resistance for the coil at 25 °C (77 °F) ... 7.75 ± 1.00 Ohms
- Temperature range for the coil ... -40°C to 121°C (-40°F to 218°F)
- Current for the coil at 121 °C (250 °F) ... 1 Amp
Caterpillar Information System:
2002/11/18 New Adapters for the Shaw Aero Fast Fill Fuel Systems {1273, 1274, 1710}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Brake and Planetary
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0490 - FMI 02
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Limit Switch (Parking Brake)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Pressure Sensor (Brake Charging)
CB-434C Vibratory Compactor Hydraulic System Oil Filter - Replace
R1600 Load Haul Dump Machine Electrical System Electrical Power Supply
R1600 Load Haul Dump Machine Electrical System General Information
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
3126B Engine for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Articulating and Oscillating Hitch
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Piston and Rings
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Parking Brake
2002/07/08 Special Instruction, REHS1022 , "Modification Procedure for Moving the Color Markng System from the Stick to the Harvester Head" is Available {6393}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Pressure Sensor (Brake Oil)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Solenoid Valve (Brake Charging)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Solenoid Valve (Reversing Fan)
Computer Aided Bucking System (CABSWin/CABSDos) System Configuration (HH300/HH500/HH700) - CABSWin
3126B Engine for 570B and 580B Wheel Harvesters Diagnostic Codes
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Assemble
3054E Industrial Engine Rocker Shaft
CB-434C Vibratory Compactor Hydraulic System Oil Level - Check
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0590 - FMI 02
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0590 - FMI 09