Illustration 1 | g00904342 |
CABSWin System Configuration in the Cab (1) Presentation and programming unit "(AU)" (2) Printer (3) Stick harness (4) Connection module "(BU)" (5) High pressure load sensing signal (6) Steering left (7) Medium pressure load sensing signal (8) Output module "(D)" (9) Stump treatment (10) Engine RPM increase (11) Steering right (12) Color marking 2 (13) Color marking 1 (14) Keypads (15) Keypad module "(KU)" |
Keypad module "(KU)" (15) adapts signals from two keypads (14) .
Connection module "(BU)" (4) connects the presentation and programming unit "(AU)" (1) and keypads (14) .
Output module "(D)" (8) controls the outputs for various functions on the harvester head and the machine.
Illustration 2 | g00904343 |
CABSWin System Configuration on the Harvester Head (16) Tilt up (17) Photo cell (option) (18) Saw bar lubricate (19) Diameter sensor 1 (20) Holding arm open (21) Saw bar home (22) Measuring wheel out (23) Length sensor (24) Output module "(D)" (25) Input module "(I)" (26) Butt knife out (option) (27) Top saw home (option) (28) Holding arm close (29) Diameter sensor 2 (30) Tilt down (31) Upper knife sensor (32) Feed roller arms close (33) Saw bar position (34) Delimbing knives open (35) Saw bar out - top saw (option) (36) Feed reverse (37) Saw bar out/in (38) Output module "(A)" (39) Calculation and connection module "(CU)" (40) Saw motor (41) Feed forward (42) Saw motor - top saw (option) (43) Delimbing knives close (44) Color marking valve 1 (45) Color marking valve 2 (46) Harness on stick (47) Harness connector on head |
Input module "(I)" (25) receives inputs from the sensors on the harvester head.
Output module "(A)" (38) and output module "(D)" (24) control the outputs for various functions of the harvester head.
Calculation and connection module "(CU)" (39) contains a signal processor and the software that controls the CABSWin system.