3126B Engine for 570B and 580B Wheel Harvesters Caterpillar


Diagnostic Codes

Usage:

570B CKG
Portions of this material are reprinted with permission from SAE J1939DA_201607© 2016 SAE International. SAE International is not responsible for any use or translation of this material, in whole or in part. Please contact SAE International to obtain a complete copy of SAE J1939DA_201607, the official definitive source of this standard.

Table 1
SPN/FMI Code  CID/FMI Code  Event Code  Description of Code 
94-03  94-03  Fuel Pressure open/short to +batt 
94-04  94-04  Fuel Pressure short to ground 
94-15  E096  High Fuel Pressure 
94-17  E095  Fuel Filter Restriction Warning 
100-03  100-03  Engine Oil Pressure open/short to +batt 
100-04   100-04   Engine Oil Pressure short to ground 
100-17  E100  Low Engine Oil Pressure Warning 
100-18  E039  Low Engine Oil Pressure Derate 
102-03  273-03  Turbo Outlet Pressure open/short to +batt 
102-04  273-04  Turbo Outlet Pressure short to ground 
108-03  274-03  Atmospheric Pressure open/short to +batt 
108-04  274-04  Atmospheric Pressure short to ground 
110-03  110-03  Engine Coolant Temperature open/short to +batt 
110-04  110-04  Engine Coolant Temperature short to ground 
110-15  E017  High Engine Coolant Temperature Warning 
110-16  E015  High Engine Coolant Temperature Derate 
152-12  254-12  Electronic Control Module Error 
164-00  164-00  High Injector Actuation Pressure 
164-02  164-02  Injector Actuation Pressure Sensor Loss of Signal 
164-03  164-03  Injector Actuation Pressure open/short to +batt 
164-04  164-04  Injector Actuation Pressure short to ground 
164-11  164-11  Injector Actuation Press Sensor Mechanical Failure 
168-02  168-02  System Voltage Intermittent 
172-03  172-03  Intake Manifold Air Temp open/short to +batt 
172-04  172-04  Intake Manifold Air Temp short to ground 
172-15  E025  High Inlet Air Temperature Derate 
172-16  E027  High Inlet Air Temperature Warning 
175-03  175-03  Engine Oil Temperature open/short to +batt 
175-04  175-04  Engine Oil Temperature short to ground 
190-00  E190  Engine Overspeed Warning 
190-02  190-02  Loss of Engine Speed Signal 
190-11  190-11  Engine Speed Signal unknown error 
228-13  261-13  Engine Timing Calibration required 
234-02  253-02  Personality Module mismatch 
620-03  262-03  5 Volt Sensor Supply short to +batt 
620-04  262-04  5 Volt Sensor Supply short to ground 
639-09  247-09  J1939 Data Link communications 
651-11  1-11  Injector Cylinder #1 mechanical failure 
652-11  2-11  Injector Cylinder #2 mechanical failure 
653-11  3-11  Injector Cylinder #3 mechanical failure 
654-11  4-11  Injector Cylinder #4 mechanical failure 
655-11  5-11  Injector Cylinder #5 mechanical failure 
656-11  6-11  Injector Cylinder #6 mechanical failure 
678-03  41-03  8 Volt DC Supply short to +batt 
678-04  41-04  8 Volt DC Supply short to ground 
679-11  42-11  Inject Actuation Control Valve open/short 
723-02  342-02  Loss of Secondary Engine Speed Signal 
723-11  342-11  Secondary Engine Speed Sensor mechanical failure 
729-05  617-05  Air Inlet Heater Relay open circuit 
729-06  617-06  Air Inlet Heater Relay short to ground 
1075-05  1627-05  Fuel Pump Relay open circuit 
1075-06  1627-06  Fuel Pump Relay short to ground 

Caterpillar Information System:

Computer Aided Bucking System (CABSWin/CABSDos) System Configuration (HH300/HH500/HH700) - CABSWin
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Solenoid Valve (Reversing Fan)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Solenoid Valve (Brake Charging)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Pressure Sensor (Brake Oil)
2002/07/08 Special Instruction, REHS1022 , "Modification Procedure for Moving the Color Markng System from the Stick to the Harvester Head" is Available {6393}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Parking Brake
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Solenoid Valve (Demand Fan)
2002/11/18 New Adapters for the Shaw Aero Fast Fill Fuel Systems {1273, 1274, 1710}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Brake and Planetary
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0490 - FMI 02
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Limit Switch (Parking Brake)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Pressure Sensor (Brake Charging)
216, 226, 232 and 242 Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Assemble
3054E Industrial Engine Rocker Shaft
CB-434C Vibratory Compactor Hydraulic System Oil Level - Check
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0590 - FMI 02
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0590 - FMI 09
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Engine Speed Sensor
CB-434C Vibratory Compactor Hydraulic System Oil Sample - Obtain
3126B Engine for Caterpillar Built Machines Low Power/Poor or No Response to Throttle
3126B Engine for Caterpillar Built Machines Poor Acceleration or Response
2002/07/29 A New Lock Valve for the Seat is Used {7312}
CB-434C Vibratory Compactor Hydraulic Tank Vent - Replace
CB34, CB34XW and CC34 Utility Compactors Reference Material
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.