 | |
| Illustration 1 | g00904208 |
Early version | |
(1) Bore diameter of the pivot housing ... 120.615 ± 0.019 mm (4.7486 ± 0.0007 inch)
(2) Bore diameter of the frame ... 88.870 ± 0.040 mm (3.4988 ± 0.0016 inch)
(3) Bore diameter of the plate bearing ... 120.618 ± 0.019 mm (4.7487 ± 0.0007 inch)
(4) Diameter of the shaft ... 76.219 ± 0.006 mm (3.0007 ± 0.0002 inch)
(5) Pin diameter of the steering pivot ... 76.18 ± 0.06 mm (2.9992 ± 0.0024 inch)
(6) Compressed diameter of the inner bushing ... 76.5 mm (3.01 inch)
(7) The grease holes are at 6:00 and12:00 positions.
(8) The grease holes are at 3:00 and 9:00 positions.
 | |
| Illustration 2 | g00904209 |
Later version | |
(1) Torque for bearing nut ... 815 N·m (600 lb ft)
(2) Bore diameter of the pivot housing ... 120.615 ± 0.019 mm (4.7486 ± 0.0007 inch)
(3) Bore diameter of the frame ... 88.870 ± 0.040 mm (3.4988 ± 0.0016 inch)
(4) Bore diameter of the plate bearing ... 120.618 ± 0.019 mm (4.7487 ± 0.0007 inch)
(5) Diameter of the shaft ... 76.219 ± 0.006 mm (3.0007 ± 0.0002 inch)
(6) Pin diameter of the steering pivot ... 76.18 ± .03 mm (3 ± 0.002 inch)
(7) Compressed diameter of the inner bushing ... 76.5 mm (3.01 inch)
(8) The grease holes are at 6:00 and 12:00 positions.
(9) The grease holes are at 3:00 and 9:00 positions.