CB-434C Vibratory Compactor Caterpillar


Fuses - Replace

Usage:

CB-434C 4DN


Fuses - Fuses protect the electrical system from damage that is caused by overloaded circuits. Replace the fuse if the element separates. If the element of a new fuse separates, check the circuit. Repair the circuit, if necessary.


NOTICE

Replace the fuses with the same type and size only.

If it is necessary to replace fuses frequently, an electrical problem may exist. Consult your Caterpillar dealer.





Illustration 1g00904095


Engine Start Switch (1) - 10 amperes


Backup Alarm (2) - 10 amperes


Water Spray System (3) - 15 amperes


Gauges (4) - 10 amperes


Air Inlet Heater (5) - 15 amperes


Parking Brake (6) - 10 amperes

Caterpillar Information System:

2002/07/08 New Systems Operation, RENR6127, "IQAN Monitoring & Control System" is Available {7600}
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Steering Control
3126B Engine for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
2002/07/22 Use the Correct Torque for the Bolts that Secure the Belt Guard {1357, 7174}
R1700G Load Haul Dump Differential and Final Drive Oil Level (Without Axle Oil Cooler) - Check
R1700G Load Haul Dump Differential and Final Drive Oil Level (With Axle Oil Cooler) - Check
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0368 - FMI 04
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Hydraulic Pump
CB-434C Vibratory Compactor Fuel Tank Water and Sediment - Drain
R1700G Load Haul Dump Differential and Final Drive Oil (Without Axle Oil Cooler) - Change
R1700G Load Haul Dump Differential and Final Drive Oil (With Axle Oil Cooler) - Change
C-12, C-15 and C-16 Engines for Caterpillar Built Machines System Configuration Parameters
2002/07/22 Special Instruction, REHS1115, "Procedure for the Installation of a Separate Brake Pump" {3108, 5056, 5070, 7306}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Connecting Rod
CB-434C Vibratory Compactor Hydraulic System Oil - Change
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers MID 039 - CID 0444 - FMI 04
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Piston and Rings
CP-533C, CS-533C, CP-563C, CS-563C, CS-573C and CS-583C Vibratory Compactors Steering System Articulating and Oscillating Hitch
3126B Engine for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
R1600 Load Haul Dump Machine Electrical System General Information
R1600 Load Haul Dump Machine Electrical System Electrical Power Supply
CB-434C Vibratory Compactor Hydraulic System Oil Filter - Replace
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Braking and Hydraulic Fan System Pressure Sensor (Brake Charging)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.