Camshaft
Show/hide table
Illustration 1 | g06167510 |
Typical example |
Show/hide table
Specification for 7E-7149 Camshaft Gp, 7E-7150 Camshaft Gp, 180-0547 Camshaft Gp, 297-8324 Camshaft Gp, 297-8325 Camshaft Gp, 461-3828 Camshaft Gp, 461-5452 Camshaft Gp, 461-5453 Camshaft Gp, 463-5629 Camshaft Gp, and 460-3684 Camshaft Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
A | 2 | 177-7760 Cam Plate | Thickness is |
B | - | - | Diameter of bearing journals in a new journal camshaft assembly is |
1 | - | 9X-6380 Bolt | Torque to |
2 | 2 | 7W-0855 Bolt | Before assembly, apply Loctite C5A Copper Anti-Seize to threads. |
Show/hide table
Illustration 2 | g03778178 |
View of area C |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
D | - | 6V-3538 Dowel | Extension of the dowel is |
Show/hide table
Illustration 3 | g03778180 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
- | - | - | Use the following procedure to determine the camshaft lobe lift: |
1. Measure camshaft lobe height (F). | |||
2. Measure base circle (G). | |||
3. Subtract the base circle (G) from the camshaft lobe height (F). The difference is the actual camshaft lobe lift. | |||
E | - | - | Specified camshaft lobe lift: |
Inlet lobe is |
|||
Exhaust lobe is |
|||
Injector lobe is |
Caterpillar Information System:
C280 Marine and Petroleum Engines Turbocharger
Generators for C15/C18 Engines Voltage Regulators
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Engine Oil Coolers - Assemble
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Engine Oil Coolers - Disassemble
336F XE Excavator Production Measurement Application
2014/12/19 Replacing the Hazardous Location Customer Connection Harness on Certain C9 and C15 Commercial Engines {1403, 1408}
2014/12/24 Accurate Diagnosis of Turbocharger Failure on Certain G3500 Engines {1052}
C3.4B Engines ECM Software - Install
C13 Industrial Engine Temperature Sensor - Remove and Install - DPF Inlet, SCR Inlet
C4.4 and C6.6 Engines Oil Contains Fuel
C4.4 and C7.1 Engines Oil Contains Coolant
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Engine Oil Coolers - Remove and Install
C280 Marine and Petroleum Engines Cylinder Block
C280 Marine Engines Cylinder Liner
C280 Marine and Petroleum Engines Fuel Injection Lines
C280 Marine Engines Connecting Rod
C280 Marine Engines Crankshaft Seals
C280 Marine Engines Cylinder Block
C280 Marine Engines Housing (Front)
C280 Marine Engines Piston and Rings
C280 Marine Engines Flywheel
Procedure for Installing Continuous Telematics Power Retrofit (CTPR) for Electric Power{7606} Procedure for Installing Continuous Telematics Power Retrofit (CTPR) for Electric Power{7606}
C9.3 Marine Engines Fuel Pressure Sensor
C3.4B Engines ECM - Replace