C280 Marine Engines Caterpillar


Cylinder Liner

Usage:

C280-08 J4R


Illustration 1g03778183
Typical example

Table 1
Specification for 377-6887 Cylinder Liner and 448-6947 Cylinder Liner 
Item  Qty  Part  Specification Description 
Thickness of flange (1) on cylinder liner is 33.00 ± 0.03 mm (1.300 ± 0.001 inch)
Bore in the new cylinder liner is 280.025 ± 0.025 mm (11.0246 ± 0.0010 inch)
Use the following procedure to install the cylinder liner:

1. Apply liquid soap on the cylinder block liner bore surfaces and the rubber seals that are on the lower end of the cylinder liner.
2. Immediately install the 1W-0115 O-Ring Seal (2) and 1W-0118 O-Ring Seal (3) in the groove that is under the flange. 
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.