Engine Oil Coolers - Assemble
- Position engine oil cooler cores (21) to brackets (19) and align marks made during disassembly. Install bolts (20).
Show/hide table
Illustration 2 g03778021 Show/hide tableIllustration 3 g03778020 - Install new gasket (18) and install manifold assembly (17). Install bolts (16).
Show/hide table
Illustration 1 | g03778026 |
- Install new gasket (15) and install bonnet and elbow assembly (14). Install bolts (13).
Show/hide table
Illustration 6 g03777998 Show/hide tableIllustration 7 g03777997 - Install new gaskets (12) and install bonnet (11).
Show/hide table
Illustration 8 g03777968 - Install housing (10). Install the O-ring seals and install manifolds (9).
Show/hide table
Illustration 9 g03777964 Show/hide tableIllustration 10 g03777963 Show/hide tableIllustration 11 g03777957 - Install new gasket (8) and install bonnet (7). Install new gasket (6) and install elbow (5). Install the O-ring seal onto tube (4) and install tube (4).
- Repeat step 4 for the opposite side.
Show/hide table
Illustration 12 g03777942 - Install the O-ring seals and position oil cooler core assembly (2) as shown. Install bolts (1) and (3).
Show/hide table
Illustration 4 | g03778019 |
Show/hide table
Illustration 5 | g03778018 |
End By:
- Install the engine oil coolers.
Caterpillar Information System:
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Engine Oil Coolers - Disassemble
336F XE Excavator Production Measurement Application
2014/12/19 Replacing the Hazardous Location Customer Connection Harness on Certain C9 and C15 Commercial Engines {1403, 1408}
2014/12/24 Accurate Diagnosis of Turbocharger Failure on Certain G3500 Engines {1052}
C3.4B Engines ECM Software - Install
C13 Industrial Engine Temperature Sensor - Remove and Install - DPF Inlet, SCR Inlet
C4.4 and C6.6 Engines Oil Contains Fuel
C4.4 and C7.1 Engines Oil Contains Coolant
C280-16 Tier 4 Marine Engine and C280-12 Tier 4 Marine Engine Engine Oil Coolers - Remove and Install
C15 Generator Set Generator Set - Test
C15 Generator Set Generator Bearing Temperature - Test/Record
465-0680 Top End Overhaul Foundational Kit for 3516 Generator Set Engines{1000} 465-0680 Top End Overhaul Foundational Kit for 3516 Generator Set Engines{1000}
Generators for C15/C18 Engines Voltage Regulators
C280 Marine and Petroleum Engines Turbocharger
C280 Marine Engines Camshaft
C280 Marine and Petroleum Engines Cylinder Block
C280 Marine Engines Cylinder Liner
C280 Marine and Petroleum Engines Fuel Injection Lines
C280 Marine Engines Connecting Rod
C280 Marine Engines Crankshaft Seals
C280 Marine Engines Cylinder Block
C280 Marine Engines Housing (Front)
C280 Marine Engines Piston and Rings
C280 Marine Engines Flywheel