New Software Is Used on Certain C32 Marine Engines {1901, 1920}
- Marine Engine:
- C32 (S/N: RND1-UP; RNY1-UP)
Description of Change: The new software updates the fuel maps and the exhaust temperatures with the proper set points.
Adaptable To: The new software replaces the former software.
The new software is adaptable to the above engines back to first production.
The new software and former software are listed in Table 1.
Show/hide table
ECM     | Former Software     | New Software     |
---|---|---|
Primary     | 379-9481 Engine Ratings Electronic Software Gp     | 392-5064 Engine Ratings Electronic Software Gp     |
Secondary     | 379-9482 Engine Ratings Electronic Software Gp     | 452-8352 Engine Ratings Electronic Software Gp     |
The new exhaust temperature set points are listed in Table 2.
Show/hide table
Adjustable Temperature     | Derate Temperature     |
---|---|
655° C (1211° F) to 705° C (1301° F)     |
715° C (1319° F)     |
Caterpillar Information System:
Procedure for Installing the 450-6188 Solenoid Valve Gp and 450-3897 Wiring Harness on G3500 Petroleum Engines{5479} Procedure for Installing the 450-6188 Solenoid Valve Gp and 450-3897 Wiring Harness on G3500 Petroleum Engines{5479}
3516C Marine Engine Catalyst (SCR) - Replace
C280-16 Engine Exhaust Manifold Shield - Remove and Install
C15 and C18 On-Highway Engines Cylinder Head - Remove and Install
C15 and C18 On-Highway Engines Rocker Arm and Shaft - Remove and Install
Exhaust Leaks May Cause Failures of the 195-2431 Detonation Sensor Groups on Certain G3500 Engines{1408, 7400} Exhaust Leaks May Cause Failures of the 195-2431 Detonation Sensor Groups on Certain G3500 Engines{1408, 7400}
C15 and C18 On-Highway Engines Crankshaft Front Seal - Remove and Install
C15 and C18 On-Highway Engines Power Take-Off Drive Group - Assemble
C15 and C18 On-Highway Engines Flywheel Housing - Remove and Install - Power Take Off equipped
C280 Marine Engines Battery
CX31-P600 Petroleum Transmission Hydraulic Oil Contamination - Test
C15 and C18 On-Highway Engines Flywheel - Remove and Install
3516C Marine Engine Model View Illustrations
C15 and C18 On-Highway Engines Camshaft - Remove and Install
C15 and C18 On-Highway Engines Camshaft - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Water in Fuel - Test
C15 and C18 On-Highway Engines Engine Oil Pan - Remove and Install
TA2 Technical Inspection for 3512B Dynamic Gas Blending Genset Engines{1000, 1050, 1250, 1300, 1350, 1400} TA2 Technical Inspection for 3512B Dynamic Gas Blending Genset Engines{1000, 1050, 1250, 1300, 1350, 1400}
2013/12/20 Improved Product Link Satellite System Special Instruction guide {7606}
C11 and C13 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove and Install
C15 and C18 On-Highway Engines Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C15 and C18 On-Highway Engines Engine Control Module - Remove and Install
C175 Oil Pressure Regulator Inspection and Rework{1304, 5117} C175 Oil Pressure Regulator Inspection and Rework{1304, 5117}
2014/03/31 A New Rear Engine Crankshaft Seal Is Now Used on Certain Excavators Equipped With C13 Engines {1161}