PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAB DOOR STOP ON CERTAIN 988H WHEEL LOADERS
Usage:
REBE6749-00
Show/hide table
| 10Dec2010 |
U-494
A-407
D-433
O-435
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REPLACING THE CAB DOOR STOP ON CERTAIN 988H WHEEL LOADERS |
|
| 7308 7256 | PS43201 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS43201" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Dec2012 |
PROBLEM
Show/hide table
| The existing door stop can allow the door to hit the rear view mirror on certain 988H Wheel Loaders. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 988H | BXY04000-04265 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 4W0518 | ANGLE |
| 2 | 5C7261 | NUT-HEX |
| 4 | 8T4121 | WASHER-HARD |
| 1 | 8T4133 | NUT |
| 1 | 8T4196 | BOLT |
| 1 | 1095008 | BUMPER-CONICAL |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 7% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Refer to the following images and replace the existing door stop with the new parts provided. |
Show/hide table
 |
| Image1 |
 |
| Image2 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
Show/hide table
| NOTE: This is a 1.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FUEL SYSTEM ON CERTAIN D10N AND D10R TRACK-TYPE TRACTORS WITH RETROFIT C27 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FUEL SYSTEM ON CERTAIN D10N AND D10R TRACK-TYPE TRACTORS WITH RETROFIT C27 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE LOW PRESSURE FUEL LINE ON CERTAIN 924H, 924H Z, 928H, AND 930H WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE LOW PRESSURE FUEL LINE ON CERTAIN 924H, 924H Z, 928H, AND 930H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PARK BRAKE OIL PRESSURE SWITCH ON CERTAIN AD30, AD45B, AND AD55B UNDERGROUND ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PARK BRAKE OIL PRESSURE SWITCH ON CERTAIN AD30, AD45B, AND AD55B UNDERGROUND ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER ON CERTAIN OEM TRANSMISSIONS AND POWER MODULES USED IN TELEHANDLERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TORQUE CONVERTER ON CERTAIN OEM TRANSMISSIONS AND POWER MODULES USED IN TELEHANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 247-0741 JOYSTICKS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 247-0741 JOYSTICKS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING AN ADDITIONAL FUEL FILTER ON CERTAIN 938H WHEEL LOADERS AND IT38H INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR INSTALLING AN ADDITIONAL FUEL FILTER ON CERTAIN 938H WHEEL LOADERS AND IT38H INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SECOND REDUCTION PLANET GEAR BEARINGS IN FINAL DRIVE GROUPS ON CERTAIN D10R AND D10T TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SECOND REDUCTION PLANET GEAR BEARINGS IN FINAL DRIVE GROUPS ON CERTAIN D10R AND D10T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL LIFT PUMP ON CERTAIN 416D, 420D, 422E, 424D, 428D, 428E, 432D, 432E, 434E, 442D, 442E, 444E, 414E, 430D BACKHOE LOADERS AND D3G XL, D3G LGP, D3G LGPJ, D4G XL, D4G LGP, D5G XL, D5G LGP, D5G LGPJ TRACK-TYP PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL LIFT PUMP ON CERTAIN 416D, 420D, 422E, 424D, 428D, 428E, 432D, 432E, 434E, 442D, 442E, 444E, 414E, 430D BACKHOE LOADERS AND D3G XL, D3G LGP, D3G LGPJ, D4G XL, D4G LGP, D5G XL, D5G LGP, D5G LGPJ TRACK-TYP
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND INSTALLING, IF NEEDED, AN ACCESSORY COUNTERWEIGHT ON CERTAIN 980H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR INSPECTING AND INSTALLING, IF NEEDED, AN ACCESSORY COUNTERWEIGHT ON CERTAIN 980H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 6I-9255, 6T-1783, 6T-2317, 6Y-7219, 7T-1860, 102-8671, 147-2280, 169-7055, 221-9685, 241-4890, 262-7319, AND 262-7320 FRICTION DISCS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN 6I-9255, 6T-1783, 6T-2317, 6Y-7219, 7T-1860, 102-8671, 147-2280, 169-7055, 221-9685, 241-4890, 262-7319, AND 262-7320 FRICTION DISCS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1L-7203 BEARINGS IN DEALER PART STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1L-7203 BEARINGS IN DEALER PART STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRACK ROLLER FRAME ON CERTAIN D6G II AND D7G II TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRACK ROLLER FRAME ON CERTAIN D6G II AND D7G II TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REFRIGERANT COMPRESSOR ON DELAY TIMER ASSEMBLY (COMPRESSOR PROTECTION MODULE) ON CERTAIN D8T, D9T, D9R, D10R, D10T, D11R, AND D11T TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE REFRIGERANT COMPRESSOR ON DELAY TIMER ASSEMBLY (COMPRESSOR PROTECTION MODULE) ON CERTAIN D8T, D9T, D9R, D10R, D10T, D11R, AND D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR ADDING SEALANT TO THE 207-8218 PLUG ON CERTAIN 621G, 623G, AND 627G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR ADDING SEALANT TO THE 207-8218 PLUG ON CERTAIN 621G, 623G, AND 627G WHEEL TRACTOR SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 185-1897 PILOT PRESSURE REDUCING VALVE ON CERTAIN 988H, 992K, AND 993K LARGE WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 185-1897 PILOT PRESSURE REDUCING VALVE ON CERTAIN 988H, 992K, AND 993K LARGE WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE SHIELD ASSEMBLY (FIREWALL) ON CERTAIN 993K WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE SHIELD ASSEMBLY (FIREWALL) ON CERTAIN 993K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING 10R8154, 10R8155, 10R8156, AND 10R8157 REMAN CYLINDER PACKS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING 10R8154, 10R8155, 10R8156, AND 10R8157 REMAN CYLINDER PACKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FENDER STEPS ON CERTAIN 973D TRACK-TYPE LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FENDER STEPS ON CERTAIN 973D TRACK-TYPE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING, IF NECESSARY, THE 210-0691 AND 204-5380 DIAGNOSTIC HOSES ON CERTAIN 953D AND 973D TRACK-TYPE LOADERS; AND ON CERTAIN D6N AND D6K TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING, IF NECESSARY, THE 210-0691 AND 204-5380 DIAGNOSTIC HOSES ON CERTAIN 953D AND 973D TRACK-TYPE LOADERS; AND ON CERTAIN D6N AND D6K TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING CRACKED FUEL TANKS ON CERTAIN D11T TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPAIRING CRACKED FUEL TANKS ON CERTAIN D11T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE DIFFERENTIAL AND BEVEL GEAR GROUP ON CERTAIN 993K WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE DIFFERENTIAL AND BEVEL GEAR GROUP ON CERTAIN 993K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 4T-1504 CYLINDER TRUNNION ON CERTAIN D6N TRACK-TYPE TRACTORS EQUIPPED WITH A SU BLADE PRODUCT SUPPORT PROGRAM FOR REPLACING THE 4T-1504 CYLINDER TRUNNION ON CERTAIN D6N TRACK-TYPE TRACTORS EQUIPPED WITH A SU BLADE
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LIFT CYLINDER YOKE ON CERTAIN D7E AND D7E LGP TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LIFT CYLINDER YOKE ON CERTAIN D7E AND D7E LGP TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FINAL DRIVE LIP SEALS ON CERTAIN D6T AND D6T XL TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FINAL DRIVE LIP SEALS ON CERTAIN D6T AND D6T XL TRACK-TYPE TRACTORS