1980/09/08 Caterpillar


4S6553 Engine Evaluation Test Instrument Group Has Been Canceled{0651}

Usage:


Some components of the 4S6553 Engine Evaluation Test Instrument Group have not been regularly available. Because of this problem, the 4S6553 Engine Evaluation Test Instrument Group has been canceled.

Two groups, an engine pressure group and a multiple use tachometer group, will be available in the future for replacement of the 4S6553 Engine Evaluation Test Instrument Group.

The 1P7443 Tachometer, 1P7444 Tachometer Generator and 4S6997 Manifold Pressure Group which are service components of the group, will be available for as long as there is a supply.

To keep a component supply available, it is Caterpillar's recommendation that these components, when in need of repairs, be exchanged.

Components and their current exchange prices are given in the chart which follows.

The components to be exchanged must be sent to:

Aircraft Instrument & Development Co.
317 E. Lewis
Wichita, Kansas 67202 U.S.A.

The components will be exchanged and shipment will be made in one or two work days. If a component is damaged beyond repair, you will be told, and a new component will have to be purchased from the Caterpillar Parts Department.

Caterpillar Information System:

1980/09/08 New Oil Scavenge Tube Assemblies Used In Oil Lines Groups{1307,1312}
1980/09/08 Easy-To-Make Tool Holds Fuel Injection Nozzles According To Cylinder Number{0634,1254}
1980/09/08 Oil Pump And Lines Group Changed To Use Different Method Of Flow Control For Emergency Lubrication System{3310,3311}
1980/09/08 Cartridge Repair Kit Available For AiResearch Turbochargers{1052,1053}
1980/09/01 5P1746 Governor Sealing Tool Available Separately{0620,1264,1286}
1980/09/01 CAUTION: Procedure For Adjustment Of Fuel Rack Setting On Hydramechanical Governors Has Been Changed{0654,1250}
1980/09/01 6V2119 Profile Tool Group Is Available For Inspection Of All Crankshafts In Caterpillar Engines{0653,1202,1203,1219,1230}
1980/09/01 6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01 Four Fabricated Tools Available For Use During Disassembly And Assembly Of Piston-Type Hydraulic Motors{5058,0622}
1980/08/25 Special Bolts Available For Better Protection Against Modifications Of Fuel System And Governor Settings{1264,1278}
1980/08/25 Vibration Isolators Used With Vacuum Switches For Air Filter Service Indicators{7452,1051,1054}
1980/08/25 Service Meter Correction Decal Available{7478,7480}
1980/09/08 6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves{0621,1202,1160,1161}
1980/09/15 6V3025 Battery Cable Repair Kit Now Available{1402,1408,0611}
1980/09/15 6V2107 And 6V2110 Drive Adapter Assemblies Available To Connect Sleeve Metering Fuel Systems To Fuel Injection Test Bench{0652,1250}
1980/09/15 Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
1980/09/15 Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15 Reference List Of Pistons Used With The Different Types Of Connecting Rods{1214,1218}
1980/09/15 Use Only Caterpillar Water Separator Elements{1263}
1980/09/22 6V3071 Seal Guide Keeps Seal In Position During Installation Of Transfer Pump {0620,1256}
1980/09/22 Do Not Use Room Temperature Vulcanizer Compounds Or Silicone Rubber Cements On O-Ring Seals In Engines; Do Not Use Too Much As Gasket Material {1000,7555}
1980/09/22 Install A New Oil Filter Element, Clean The Oil Lines And The Remote Filter Base; Turn The Engine Until The Oil Gauge Shows Pressure Before Starting A Rebuilt Engine {1307,1318}
1980/09/29 Improved Poppet Valves Used In Plate And Valve Assembly Of Transmission Control Group{3009}
1980/09/29 Woodward 2301 Speed Control (8N1731 Speed Control Group) Can Be Adapted For Use As Field Test Instrument{0651,1264,1265,1289}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.