Use Only Caterpillar Water Separator Elements{1263}
Usage:
All 3200 And 3300 Series Engines Equipped With Sleeve Metering Fuel Systems
Several fuel filter manufacturers (those who make) make water separator elements that will fit the 6N7624 Base used in water separators for 3200 and 3300 Series Engines equipped with sleeve metering fuel systems.
Use only the Caterpillar 6N7617 Water Separator Element with the 6N7624 Base in Caterpillar Engines.
Elements made by other manufacturers must be installed up side down in the 6N7624 Base. When installed up side down, these elements do not give good filter or water separation protection.
Caterpillar Information System:
1980/09/15 Reference List Of Pistons Used With The Different Types Of Connecting Rods{1214,1218}
1980/09/15 Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15 Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
1980/09/15 6V2107 And 6V2110 Drive Adapter Assemblies Available To Connect Sleeve Metering Fuel Systems To Fuel Injection Test Bench{0652,1250}
1980/09/15 6V3025 Battery Cable Repair Kit Now Available{1402,1408,0611}
1980/09/08 6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves{0621,1202,1160,1161}
1980/09/08 4S6553 Engine Evaluation Test Instrument Group Has Been Canceled{0651}
1980/09/08 New Oil Scavenge Tube Assemblies Used In Oil Lines Groups{1307,1312}
1980/09/08 Easy-To-Make Tool Holds Fuel Injection Nozzles According To Cylinder Number{0634,1254}
1980/09/08 Oil Pump And Lines Group Changed To Use Different Method Of Flow Control For Emergency Lubrication System{3310,3311}
1980/09/08 Cartridge Repair Kit Available For AiResearch Turbochargers{1052,1053}
1980/09/01 5P1746 Governor Sealing Tool Available Separately{0620,1264,1286}
1980/09/22 6V3071 Seal Guide Keeps Seal In Position During Installation Of Transfer Pump {0620,1256}
1980/09/22 Do Not Use Room Temperature Vulcanizer Compounds Or Silicone Rubber Cements On O-Ring Seals In Engines; Do Not Use Too Much As Gasket Material {1000,7555}
1980/09/22 Install A New Oil Filter Element, Clean The Oil Lines And The Remote Filter Base; Turn The Engine Until The Oil Gauge Shows Pressure Before Starting A Rebuilt Engine {1307,1318}
1980/09/29 Improved Poppet Valves Used In Plate And Valve Assembly Of Transmission Control Group{3009}
1980/09/29 Woodward 2301 Speed Control (8N1731 Speed Control Group) Can Be Adapted For Use As Field Test Instrument{0651,1264,1265,1289}
1980/09/29 Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29 Use Starter To Turn Crankshaft For 30 Seconds Or Until Oil Pressure Gauge Shows Pressure, Before Engine Is Started{1300,1450}
1980/10/06 Fretting Material Must Be Removed Before Installation Of New Bearings{1202,1203,1218,1219,1201,1230}
1980/10/06 New Timing Advance Weight Used{1272,1288,1286,1264}
1980/10/06 New Breather Groups Used{1317}
1980/10/13 6V3184 Brush Group Available To Clean Crankshaft Oil Passages{0622,1202}
1980/10/13 6V2156 And 6V2157 Link Brackets Now Available To Lift Heavy Loads{0644}