Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
Usage:
3208 Industrial Engines
The May 26, 1980 Service Magazine article, "New Check Valve Used In Fuel Injection Pump Assembly," and the June 2, 1980 Service Magazine article, "Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies," told of two new check valves used in 3208 Industrial Engines.
The 8N1414 Fuel Injection Pump Check Assembly (reverse flow check) is used in 3208 Industrial Engines, Serial Numbers 90N37285-Up, with engine arrangement numbers 8N4537, 8N4538, 8N4539, 8N4540, 8N4541, 8N4542, 8N4543, 8N4544 or 8N4545.
All other 3208 Industrial Engine Arrangements now use the 7N5148 Check Valve which has a groove.
DO NOT use the 8N1414 Fuel Injection Pump Check Assembly and the 7N5148 Check Valve in place of each other.
Caterpillar Information System:
1980/09/15 6V2107 And 6V2110 Drive Adapter Assemblies Available To Connect Sleeve Metering Fuel Systems To Fuel Injection Test Bench{0652,1250}
1980/09/15 6V3025 Battery Cable Repair Kit Now Available{1402,1408,0611}
1980/09/08 6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves{0621,1202,1160,1161}
1980/09/08 4S6553 Engine Evaluation Test Instrument Group Has Been Canceled{0651}
1980/09/08 New Oil Scavenge Tube Assemblies Used In Oil Lines Groups{1307,1312}
1980/09/08 Easy-To-Make Tool Holds Fuel Injection Nozzles According To Cylinder Number{0634,1254}
1980/09/08 Oil Pump And Lines Group Changed To Use Different Method Of Flow Control For Emergency Lubrication System{3310,3311}
1980/09/08 Cartridge Repair Kit Available For AiResearch Turbochargers{1052,1053}
1980/09/01 5P1746 Governor Sealing Tool Available Separately{0620,1264,1286}
1980/09/01 CAUTION: Procedure For Adjustment Of Fuel Rack Setting On Hydramechanical Governors Has Been Changed{0654,1250}
1980/09/01 6V2119 Profile Tool Group Is Available For Inspection Of All Crankshafts In Caterpillar Engines{0653,1202,1203,1219,1230}
1980/09/01 6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/15 Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15 Reference List Of Pistons Used With The Different Types Of Connecting Rods{1214,1218}
1980/09/15 Use Only Caterpillar Water Separator Elements{1263}
1980/09/22 6V3071 Seal Guide Keeps Seal In Position During Installation Of Transfer Pump {0620,1256}
1980/09/22 Do Not Use Room Temperature Vulcanizer Compounds Or Silicone Rubber Cements On O-Ring Seals In Engines; Do Not Use Too Much As Gasket Material {1000,7555}
1980/09/22 Install A New Oil Filter Element, Clean The Oil Lines And The Remote Filter Base; Turn The Engine Until The Oil Gauge Shows Pressure Before Starting A Rebuilt Engine {1307,1318}
1980/09/29 Improved Poppet Valves Used In Plate And Valve Assembly Of Transmission Control Group{3009}
1980/09/29 Woodward 2301 Speed Control (8N1731 Speed Control Group) Can Be Adapted For Use As Field Test Instrument{0651,1264,1265,1289}
1980/09/29 Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29 Use Starter To Turn Crankshaft For 30 Seconds Or Until Oil Pressure Gauge Shows Pressure, Before Engine Is Started{1300,1450}
1980/10/06 Fretting Material Must Be Removed Before Installation Of New Bearings{1202,1203,1218,1219,1201,1230}
1980/10/06 New Timing Advance Weight Used{1272,1288,1286,1264}