Fine Swing Control - If Equipped
Show/hide table
Illustration 1 | g00729412 |
The fine swing control switch is on the right side instrument panel.
Show/hide table
Fine Swing Control - Push down on the top of the switch in order to activate the fine swing control. This improves swing control during deceleration of a swing. |
Push down on the bottom of the switch in order to turn off the fine swing control. Operate the machine with the switch in the OFF position when great swing forces are required. For example, digging on a sidewall requires great swing force. Operate the machine with the switch in the OFF position in order to control the motion with the swing brake.
Caterpillar Information System:
320C Excavator Automatic Engine Speed Control (AEC)
320C Excavator Engine Speed Control
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
MP-15, MP-20, MP-30 and MP-40 Multi Processors Control Valve Pressure (Hydraulic Rotator) - Test
3126B Engines Electrical System
320C Excavator Window Wiper and Washer Control
H140C S and H160C S Hydraulic Hammers Mounting Bracket Bolts - Tighten
320C Excavator Cab Door
325C and 325C L Excavator Alternate Exit
MP-15, MP-20, MP-30 and MP-40 Multi Processors Speed Control Valve (Hydraulic Cylinder) - Test and Adjust
330C Excavator Window (Front)
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
MP-15, MP-20, MP-30 and MP-40 Multi Processors Hydraulic Rotator Cycle Time - Check
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
3176C and 3196 Engines for Caterpillar Built Machines Intermittent Low Power or Power Cutout
3126B Engines Electronic Control System Components
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
MP-15, MP-20, MP-30 and MP-40 Multi Processors Shear Jaw
JF Series Starting Motor Pinion Continues to Engage after Engine Starts
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
3176C and 3196 Engines for Caterpillar Built Machines Poor Acceleration or Response
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing