Multi-Processor Housing
Show/hide table
Illustration 1 | g00705124 |
(1) Apply Loctite 270 to the threads of the 32 bolts before assembly.
Torque on the 32 bolts ... 270 ± 40 N·m (199 ± 30 lb ft)
(2) Apply 9S-3263 Thread Lock Compound to the threads of the six bolts that secure the lock plate to the swivel.
Show/hide table
Illustration 2 | g00707623 |
Diameters of pin (3)
-
(7) Diameter ... 101.953 ± .011 mm (4.0139 ± 0.0004 inch) (8) Diameter ... 99.953 ± .011 mm (3.9351 ± 0.0004 inch) (9) Diameter ... 98.4 mm (3.87 inch) (10) Diameter ... 97.953 ± .011 mm (3.8564 ± 0.0004 inch) (11) Diameter ... 95.953 ± .011 mm (3.7777 ± 0.0004 inch)
(4) Bore in the bushing ... 140.15 ± .05 mm (5.5177 ± 0.0020 inch)
(5) Outer diameter of the bushing ... 139.86 ± .02 mm (5.5063 ± 0.0008 inch)
Bore in the bushing ... 124.86 ± .02 mm (4.9157 ± 0.0008 inch)
(6) Diameter of the pin ... 99.953 ± .011 mm (3.9351 ± 0.0004 inch)
Caterpillar Information System:
JF Series Starting Motor Pinion Continues to Engage after Engine Starts
MP-15, MP-20, MP-30 and MP-40 Multi Processors Shear Jaw
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
3126B Engines Electronic Control System Components
3176C and 3196 Engines for Caterpillar Built Machines Intermittent Low Power or Power Cutout
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
MP-15, MP-20, MP-30 and MP-40 Multi Processors Hydraulic Rotator Cycle Time - Check
320C Excavator Fine Swing Control - If Equipped
320C Excavator Automatic Engine Speed Control (AEC)
320C Excavator Engine Speed Control
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
3176C and 3196 Engines for Caterpillar Built Machines Poor Acceleration or Response
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
3126B Engines General Information
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) System Schematic
330C Excavator Joystick Controls
M325B Material Handler Machine Systems Check Valve (Stabilizer) - Disassemble
M325B Material Handler Machine Systems Check Valve (Stabilizer) - Assemble
2014/08/11 Diagnostic Cables and Harnesses Are Available {0785}
2013/10/14 New Expander Rings and Backup Rings are Available {0617}
2000/08/07 The Main Control Valve is Improved for Use with the "Bent Axis Travel Motor" {5051}
330C Excavator Joystick Controls