Multi-Processor Housing
Show/hide table
| 图 1 | g00729774 |
(1) 将 9S-3263 螺纹锁固胶 涂抹在固定回转接头锁定板的 6 个螺栓的螺纹上。
(2) 组装前，将 Loctite 270 涂抹在 24 个螺栓的螺纹上。
24 个螺栓的扭矩 ... 530 ± 70 N·m (391 ± 52 lb ft)
Show/hide table
| 图 2 | g00707623 |
销的直径 (3)
-
(7) 直径 ... 126.944 ± .012 mm (4.9978
± 0.0005 in) (8) 直径 ... 124.944 ± .012 mm (4.9190
± 0.0005 in) (9) 直径 ... 122.4 mm (4.8189 in) (10) 直径 ... 121.944 ± .012 mm (4.8009
± 0.0005 in) (11) 直径 ... 119.953 ± .011 mm (4.7225
± 0.0004 in)
(4) 衬套孔 ... 160.20 ± 05 mm (6.3071 ± 0.0020 in)
(5) 衬套直径 ... 159.86 ± 02 mm (6.2937 ± 0.0008 in)
衬套孔 ... 139.86 ± .02 mm (5.5063 ± 0.0008 in)
(6) 销的直径 ... 124.944 ± .012 mm (4.9190 ± 0.0005 in)
Caterpillar Information System:
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
JF Series Starting Motor Pinion Continues to Engage after Engine Starts
MP-15, MP-20, MP-30 and MP-40 Multi Processors Shear Jaw
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
3126B Engines Electronic Control System Components
3176C and 3196 Engines for Caterpillar Built Machines Intermittent Low Power or Power Cutout
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
MP-15, MP-20, MP-30 and MP-40 Multi Processors Hydraulic Rotator Cycle Time - Check
320C Excavator Fine Swing Control - If Equipped
320C Excavator Automatic Engine Speed Control (AEC)
320C Excavator Engine Speed Control
3176C and 3196 Engines for Caterpillar Built Machines Poor Acceleration or Response
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
3126B Engines General Information
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) System Schematic
330C Excavator Joystick Controls
M325B Material Handler Machine Systems Check Valve (Stabilizer) - Disassemble
M325B Material Handler Machine Systems Check Valve (Stabilizer) - Assemble
2014/08/11 Diagnostic Cables and Harnesses Are Available {0785}
2013/10/14 New Expander Rings and Backup Rings are Available {0617}
2000/08/07 The Main Control Valve is Improved for Use with the "Bent Axis Travel Motor" {5051}
330C Excavator Joystick Controls
307C Excavator Window Wiper and Washer Control