Mounting Bracket Bolts - Tighten
Tighten the bolts for the mounting bracket to the following torque value:
Show/hide table
| Torque Values for the Bolts for the Mounting Bracket | |||
| Sales Model | Part Number and Part Name | Quantity | Torque Value |
| H140Cs | 7X-2454 Bolt | 10 | 900 ± 100 N·m (664 ± 74 lb ft) |
| H160Cs | 7Y-5265 Bolt | 10 | 3100 ± 350 N·m (2286 ± 258 lb ft) |
Caterpillar Information System:
320C Excavator Cab Door
325C and 325C L Excavator Alternate Exit
MP-15, MP-20, MP-30 and MP-40 Multi Processors Speed Control Valve (Hydraulic Cylinder) - Test and Adjust
330C Excavator Window (Front)
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
320C Excavator Seat Heater - If Equipped
320C Excavator Storage Box
3176C and 3196 Engines for Caterpillar Built Machines Engine Cranks but Will Not Start
325D and 329D Excavators Radio - If Equipped
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
307C Excavator Hydraulic System Main Pump (Flow) - Test
320C Excavator Window Wiper and Washer Control
3126B Engines Electrical System
MP-15, MP-20, MP-30 and MP-40 Multi Processors Control Valve Pressure (Hydraulic Rotator) - Test
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
320C Excavator Engine Speed Control
320C Excavator Automatic Engine Speed Control (AEC)
320C Excavator Fine Swing Control - If Equipped
MP-15, MP-20, MP-30 and MP-40 Multi Processors Hydraulic Rotator Cycle Time - Check
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
3176C and 3196 Engines for Caterpillar Built Machines Intermittent Low Power or Power Cutout
3126B Engines Electronic Control System Components
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket