Mounting Bracket
Show/hide table
Illustration 1 | g00729735 |
Typical Example |
(1) Torque on the 14 bolts ... 1000 ± 125 N·m (738 ± 92 lb ft)
Caterpillar Information System:
3126B Engines Electronic Control System Components
3176C and 3196 Engines for Caterpillar Built Machines Intermittent Low Power or Power Cutout
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
MP-15, MP-20, MP-30 and MP-40 Multi Processors Hydraulic Rotator Cycle Time - Check
320C Excavator Fine Swing Control - If Equipped
320C Excavator Automatic Engine Speed Control (AEC)
320C Excavator Engine Speed Control
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
MP-15, MP-20, MP-30 and MP-40 Multi Processors Control Valve Pressure (Hydraulic Rotator) - Test
3126B Engines Electrical System
320C Excavator Window Wiper and Washer Control
H140C S and H160C S Hydraulic Hammers Mounting Bracket Bolts - Tighten
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
MP-15, MP-20, MP-30 and MP-40 Multi Processors Shear Jaw
JF Series Starting Motor Pinion Continues to Engage after Engine Starts
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
3176C and 3196 Engines for Caterpillar Built Machines Poor Acceleration or Response
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
3126B Engines General Information
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) System Schematic
330C Excavator Joystick Controls
M325B Material Handler Machine Systems Check Valve (Stabilizer) - Disassemble
M325B Material Handler Machine Systems Check Valve (Stabilizer) - Assemble