Illustration 1 | g00681271 |
Window Wiper (A) - Push the switch in order to activate the window wiper. Whenever the switch is depressed, the mode of the window wiper will change according to the indicator light that is illuminated. |
Six Second Delay (1) - When switch (A) is depressed one time, indicator light (1) will turn on. The window wiper will operate intermittently at six second intervals.
Three Second Delay (2) - When switch (A) is depressed two times, indicator light (2) will turn on. The window wiper will operate intermittently at three second intervals.
Continuous Operation (1) and (2) - When switch (A) is depressed three times, indicator light (1) and (2) will turn on. The window wiper will operate continuously.
OFF - When switch (A) is depressed four times, the indicator lights will turn off. The window wiper stops.
NOTICE |
---|
If the wiper does not operate with the switch in the ON position, turn the switch off immediately. Check the cause. If the switch remains on, motor failure can result. |
Window Washer (B) - Push the switch in order to activate the window washer. While the switch is depressed, indicator light (3) will come on and washer fluid will spray from the nozzle. The window wiper will also operate while the switch is depressed. After the switch is released for approximately three seconds, the window wiper will stop. |
NOTICE |
---|
If the washer is used continuously for more than 20 seconds or used when no washer solution comes out, motor failure can result. |