MP-15, MP-20, MP-30 and MP-40 Multi Processors Caterpillar


Shear Jaw

Usage:

MP30 ABX



Illustration 1g00729587

(1) Diameter 172-5941 Pin ... 169.044 ± .012 mm (6.6553 ± 0.0005 inch)

(2) Outer diameter of 172-3723 Bushing ... 195.108 ± .015 mm (7.6814 ± 0.0006 inch)

(2) Inner diameter of 172-3723 Bushing ... 170.180 ± .050 mm (6.7000 ± 0.0020 inch)

(3) 172-3725 Shim thickness ... 2.5 mm (0.10 inch)

(4) 172-3726 Shim thickness ... 3 mm (0.12 inch)

(5) 172-3727 Shim thickness ... 3.5 mm (0.14 inch)

Caterpillar Information System:

G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
3126B Engines Electronic Control System Components
3176C and 3196 Engines for Caterpillar Built Machines Intermittent Low Power or Power Cutout
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket
MP-15, MP-20, MP-30 and MP-40 Multi Processors Hydraulic Rotator Cycle Time - Check
320C Excavator Fine Swing Control - If Equipped
320C Excavator Automatic Engine Speed Control (AEC)
320C Excavator Engine Speed Control
G112, G115, G125 and G140 Mechanical Grapple Mounting Bracket - Remove and Install
MP-15, MP-20, MP-30 and MP-40 Multi Processors Control Valve Pressure (Hydraulic Rotator) - Test
3126B Engines Electrical System
JF Series Starting Motor Pinion Continues to Engage after Engine Starts
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
3176C and 3196 Engines for Caterpillar Built Machines Poor Acceleration or Response
MP-15, MP-20, MP-30 and MP-40 Multi Processors Multi-Processor Housing
3126B Engines General Information
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) System Schematic
330C Excavator Joystick Controls
M325B Material Handler Machine Systems Check Valve (Stabilizer) - Disassemble
M325B Material Handler Machine Systems Check Valve (Stabilizer) - Assemble
2014/08/11 Diagnostic Cables and Harnesses Are Available {0785}
2013/10/14 New Expander Rings and Backup Rings are Available {0617}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.