Drive Shaft (Center) - Remove and Install
- Connect steering frame lock.
- Turn the battery disconnect switch to the OFF position.
Show/hide table
Illustration 1 g02558918 - Remove bolts (1) and center drive shaft (2).
- Install center drive shaft (2) in the reverse order of removal.
- Tighten bolts (1) to a torque of
108 ± 14 N·m (80 ± 10 lb ft) .
- Tighten bolts (1) to a torque of
Caterpillar Information System:
AP1000E Asphalt Paver Equipped with a Cat C6.6 Engine Declaration of Conformity
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Drive Shaft (Front) - Remove and Install
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Service Brake Oil)
2011/06/08 Improved Magnetic Switch Is Now Used For Electric Motors On Certain Articulated Trucks {4324, 5927, 7499}
XQ125 Generator Set Fuel Tank Water and Sediment - Drain
SC-57 Felling Head Felling Head Preparation for Troubleshooting
Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901} Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901}
2570C and 2670C Wheel Feller Bunchers Engine Supplement Turbocharger - Install - First Stage Turbocharger
2570C and 2670C Wheel Feller Bunchers Engine Supplement Turbocharger - Install - Second Stage Turbocharger
3516B Engine for 994F and 994H Wheel Loaders Oil Pressure Is Low
2570C and 2670C Wheel Feller Bunchers Engine Supplement Turbocharger - Remove - First Stage Turbocharger
2570C and 2670C Wheel Feller Bunchers Engine Supplement Turbocharger - Remove - Second Stage Turbocharger
262C2 Skid Steer Loader, 277C2 and 287C2 Multi Terrain Loaders and 279C2 and 289C2 Compact Track Loaders Rated Load
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Drive Shaft (Rear) - Remove and Install
2011/08/26 A New Wiring Harness Is Used On Certain Commercial Engines {1408, 1900}
2470C, 2570C and 2670C Wheel Feller Bunchers Power Train Brake Accumulator (Service) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C9.3 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
SC-57 Felling Head Felling Head Disc Saw Performance - Test and Adjust
R1600G Load Haul Dump 3176C Engine Supplement Transmission Oil Cooler - Remove
Spill Guard Installation Procedure for Certain Buckets on R2900G Load Haul Dump Machines{7186} Spill Guard Installation Procedure for Certain Buckets on R2900G Load Haul Dump Machines{7186}
C13, C15, and C18 Generator Set Engines Turbocharger
C175-16 Locomotive Engine Cylinder Liner