Improvements to the Bezel of the Dashboard {7451}
- Integrated Toolcarrier:
- IT62H (S/N: M5G1-UP)
- Wheel Loader:
- 950GSeries II (S/N: BAA1-UP; AYB1-UP; AYD1-UP; AYL1-UP; AXR1-UP; AYS1-UP; AXX1-UP)
- 950H (S/N: N1A1-UP; M1G1-UP; J5J1-UP; K5K1-UP)
- 962GSeries II (S/N: BAB1-UP; BAC1-UP; BAD1-UP; AYE1-UP; AYG1-UP; AXS1-UP; AXY1-UP)
- 962H (S/N: N4A1-UP; M3G1-UP; J6J1-UP; K6K1-UP)
- 966GSeries II (S/N: AXJ1-UP; AXL1-UP; ANT1-UP; AWY1-UP; ANZ1-UP; AWZ1-UP)
- 966H (S/N: A6D1-UP; A6G1-UP; A6J1-UP)
- 972GSeries II (S/N: AXC1-UP; AXE1-UP; AXN1-UP; AWP1-UP; AXP1-UP; ANY1-UP)
- 972H (S/N: A7D1-UP; A7G1-UP; A7J1-UP)
- 980GSeries II (S/N: AXG1-UP; AWH1-UP; AYT1-UP)
- 980H (S/N: MHG1-UP; A8J1-UP; JMS1-UP)
Description of Change: Improvements have been made to the bezel that is located on the panel. The improvements will increase the durability of the bezel.
Adaptable To: Two improvements have been made to the bezel. The first improvement was to the alignment of the mounting holes on the 198-8772 Duct As. The second improvement was the 198-8774 Bezel. The bezel has been updated in order to include additional clearance at all mounting holes. A new 198-8774 Bezel can be installed in order to gain the proper clearance.
Show/hide table
Illustration 1 | g01623431 |
This change is adaptable with the Wheel Loaders that are listed above.
This change is effective with the following Wheel Loaders.
- (S/N: K6K386-UP)
- (S/N: M5G424-UP)
- (S/N: M3G475-UP)
- (S/N: A7D721-UP)
- (S/N: N4A1024-UP)
- (S/N: A7G1112-UP)
- (S/N: M1G1527-UP)
- (S/N: A6D1894-UP)
- (S/N: K5K2250-UP)
- (S/N: N1A2617-UP)
- (S/N: A6G3361-)
- (S/N: MHG4052-UP)
- (S/N: JMS4206-UP)
Caterpillar Information System:
Inspection Procedure for the Ball Stud for Certain Off-Highway Trucks and Quarry Trucks {4303, 4305} Inspection Procedure for the Ball Stud for Certain Off-Highway Trucks and Quarry Trucks {4303, 4305}
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Instrument Panel - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Electrical Connectors - Inspect
320D Excavator Camera
785D OEM Off-Highway Truck Machine Systems Window Wiper Motor - Remove and Install
785D OEM Off-Highway Truck Machine Systems Wiper Arm - Remove and Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Gear Pump (Hoist) - Install
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Gear Pump (Hoist) - Remove
PL61 Pipelayer Machine Systems Hydraulic Tank and Filter - Install
PL61 Pipelayer Machine Systems Hydraulic Tank and Filter - Remove
785D OEM Off-Highway Truck Machine Systems Module (Intermittent Wiper) - Remove and Install
2008/09/08 Correction to Operation and Maintenance Manual , "Maintenance Interval Schedule" {6128}
430E Backhoe Loader Boom Cylinder - Remove and Install
430E Backhoe Loader Extendable Stick Cylinder - Remove and Install
430E Backhoe Loader Lift Cylinder - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Steering Wheel - Remove and Install
Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066} Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066}
2008/08/25 An Improved Hydraulic Electronic Unit Injector (HEUI) Pump is Available {1714}
2008/08/25 An Improved Hydraulic Electronic Unit Injector (HEUI) Pump is Available {1714}
2008/10/06 An Improved Fuel Tank Breather is Now Used {1710}
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Hoist Electronic Control - Remove and Install
430E Backhoe Loader Thumb Cylinder - Remove and Install
430E Backhoe Loader Bucket Cylinder - Remove and Install
CD54 Vibratory Compactor Machine Systems Piston Pump (Drum Propel) - Remove