PL61 Pipelayer Machine Systems Caterpillar

Hydraulic Tank and Filter - Install

Usage:

PL61 WGS

Show/hide table

Show/hide table

NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat^® products. Dispose of all fluids according to local regulations and mandates.

Show/hide table

NOTICE

Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.

Show/hide table

Attach Tooling (A), Tooling (B), and a suitable lifting device to hydraulic tank and filter (17). The weight of hydraulic tank and filter (17) is approximately 100 kg (220 lb). Use Tooling (A), Tooling (B), and the suitable lifting device in order to position hydraulic tank and filter (17).
Show/hide table

Illustration 2 g01625207
Install two mount assemblies (26) (not shown), hard washers (25), bolts (24), and the nuts.
Show/hide table

Illustration 3 g01625205
Install mount assemblies (21), hard washers (22), and bolts (23).
Show/hide table

Illustration 4 g01625186
Install mount assemblies (20), hard washers (19), and bolts (18).
Show/hide table

Illustration 5 g01625167
Install fitting (15). Connect hose assembly (16).
Show/hide table

Illustration 6 g01625156
Connect clip (14).
Show/hide table

Illustration 7 g01622989
Connect hose assembly (13).
Show/hide table

Illustration 8 g01622982
Connect hoses (12).
Show/hide table

Illustration 9 g01622959
Connect hose assembly (11) and hose assembly (10).
Show/hide table

Illustration 10 g01622917
Connect hose assembly (9) and hose assembly (8).
Show/hide table

Illustration 11 g01622880
Position the clip and install bolt (5). Connect harness assembly (7). Attach cable straps (6).
Show/hide table

Illustration 12 g01622910
Connect clip (4) and clip (3). Connect hose (2).
Show/hide table

Illustration 13 g01622906
Connect clamp (1).

End By:

Install the piston pump for the implement. Refer to Disassembly and Assembly, "Piston Pump (Implement) - Install".
Install the gear pump for the hydraulic fan. Refer to Disassembly and Assembly, "Gear Pump (Hydraulic Fan) - Install".
Install the left side track brake. Refer to Disassembly and Assembly, "Track Brake - Install".
Install the left side hydrostatic piston motor. Refer to Disassembly and Assembly, "Piston Motor (Hydrostatic) - Install".
Install the rollover protective structure. Refer to Disassembly and Assembly, "Rollover Protective Structure (ROPS) - Remove and Install".